NIBCO 3 in. PVC DWV Soil Pipe Hub x No Hub Adapter
Related Items
ProPlus 1/2 in. x 260 ft. Teflon Tape (10-Pack)
Item # 24-89338
Product Overview
The NIBCO 3 in. PVC DWV Soil Pipe Hub x No Hub Adapter is used in a non-pressurized sanitary system which removes water-borne waste from plumbing and appliances. It adapts PVC piping to cast iron using cement and clamp or rubber sleeve.
- 3 in. Inside Diameter and 3.125 in. Outside Diameter
- Primer must be used before cementing PVC
- Use with clamp or rubber sleeve
- For above-ground DWV
- Adapts PVC to cast iron using solvent
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140F
Proposition 65 Information
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Documentation
WarrantySpecifications
Warranty
NIBCO INC. warrants each NIBCO plumbing plastic fitting (including plumbing valves) to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date of purchase.