Searched for "40170000"
The NIBCO PVC DWV 22-1/2 elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 22-1/2 elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Changes the direction of pipe by 22-1/2 degree
- Compatible with PVC pipe
- Designed for use in non-pressurized sanitary system DWV
- Solvent weld hub x hub connection
- Maximum working pressure of 5 psi
Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and CPVC in any combination and the Disconnect Clip makes it easy to take the connection apart when needed.
- 1-disconnect clip works for multiple SharkBite push-fit fittings of the same size
- Available 8 sizes: 1/4 in., 3/8 in., 1/2 in., 3/4 in., 1 in., 1 1/4 in., 1-1/2 in. and 2 in.
- Designed for hydronic heating as well as potable water distribution
- Approved for underground and behind-the-wall applications without access panels
- Used with SharkBite copper tube size push-to-connect fittings
- SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and CPVC in any combinations and the Disconnect Clip makes it easy to take the connection apart when needed.
- Light weight, durable plastic construction
- 1 disconnect clip works for multiple SharkBite push-fit fittings of the same size
- Available in 5 sizes (3/8 in., 1/4 in., 1/2 in., 3/4 in. and 1 in.)
- Makes disassembly and reuse a snap
- Used with SharkBite copper tube size push-to-connect fittings
- SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
This Oatey 4 in. PVC DWV Replacement Closet Flange features a rubber compression gasket that enables the flange to be used on many types of cast-iron piping. Installs without a need to tear up your flooring or caulk the cast-iron piping. Fits inside 4 in. cast-iron or Sch. 40 DWV piping (sold separately).
- PVC construction
- Rubber compression gasket enables the flange to be used on many types of cast-iron piping
- 3 stainless-steel bolts are tightened to compress the rubber gasket to secure the flange to the existing piping
- Easy to use
- Compression joint provides up to 3 in. of adjustment to the riser
- Use as a replacement flange for broken flanges
Make a mistake; No problem with SharkBite. Disassembly is fast and easy using the disconnect clip. SharkBite Push-to-Connect fittings connect copper, PEX and cPVC in any combinations and the Disconnect Clip makes it easy to take the connection apart when needed.
- Light weight, durable plastic construction
- 1 disconnect clip works for multiple SharkBite push-fit fittings of the same size
- Available in 5 sizes (3/8 in., 1/4 in., 1/2 in., 3/4 in. and 1 in.)
- Makes disassembly and reuse a snap
- Used with SharkBite copper tube size push-to-connect fittings
- SharkBite fittings can be used to connect copper, PEX or CPVC in any combination
The Water-Tite Techno Flange Standard Pattern Closet Flange with Techno Knockout features an inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered and protected until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4-inch Schedule 40 DWV pipe, this PVC toilet flange has a Flush-Tite design that allows for flush installation inside of 4-inch pipe. It also features a beveled hum, which makes it easier to insert into 4-inch foam-core pipe.
- PVC closet flange with inset test cap that cannot be damaged by construction equipment
- Facilitates quick and easy connection of the toilet to the plumbing system
- Techno flange knockout breaks out in one piece and will not fall down the drain
- Beveled hub design allows for easier insertion into 4-inch foam-core pipe
- Fits 3- and 4-inch PVC Schedule 40 DWV (drain, waste, and vent) pipe
- Solvent weld installation
Should your Kinetic Water Ram ever need repair, General makes a repair kit. The KRRK is complete with all internal O-rings and replacement parts to get your Ram back in perfect working order. General makes routine maintenance easy.
- Works with all Kinetic Water Rams
- Includes all O-rings, washers, leather cup to repair the unit
- If the Ram has difficulty holding pressure, you can easily replace all the seals at the same time using the Ram Repair Kit
- Safe, reliable and easy to install
- Repair video available on General's website
- Instructions included
Plastic clamp reduces noise from tubing expansion and contraction. Supports copper, PEX, polybutylene and ideally isolates CPVC tubing from wood. Impact resistant to 0 degree F (-18C) Maximum Temperature: 160 degree F (71C) continuous.
- Plastic half clamp preloaded with nail
- Supports copper, PEX and polybutylene tubing
- Not recommended for CPVC tubing
- Impact resistant to 0 degree F (-18 degree C) maximum temperature: 160 degree F continuous
- Available in sizes that fit 1/2-, 3/4-, or 1 in. pipe
- 1 in.
Conforms to ASTM D2513, ASTM D1248 and ANSI B31.8
- CTS tubing
- Use with Perfection or Continental fittings
- Pressure rated up to 80 lbs.
- 1/2 in. CTS
- 0.090 min wall
- 0.625 nominal O.D.
- 150 ft. length
- 0.090 SDR must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes.
- ASTM D2513
- PE 2708
- Direct burial
- Flexible
DWV PVC Closet Flange 3 in. x 4 in. Solvent Welds Inside 4 in. Or Over 3 in. Schedule 40 DWV Pipe. Stainless steel adjustable ring allows for easy alignment of bolts and screws. Alignment of bolts and screws.
- Metal adjustable ring allows for easy alignment of bolts and screws
- Fits 3 in. or 4 in. Sch. 40 DWV pipe
- 2 in. offset allows for margin of error for pipe flange alignment
- Solvent weld
- Durable
- Closet flange
- Medium density gas pipe for low pressure gas service
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
PVC Schedule Poptop Toilet Flange 4 in. Solvent weld installation only. Fits Over 4 in. Sch. 40 DWV PVC Pipe, with Knockout.
- PVC toilet flange 4 in.
- Solvent weld installation only
- Fits over 4 in. Sch. 40 DWV PVC pipe with knockout
- Durable
- PVC
- Designed for heavy-duty use
Hercules Jel-Flux is a self-cleaning, non-petroleum gel-type flux that contains ammoniates to penetrate tough oil films and to clean surfaces prior to soldering. Superior low smoke, low odor formula rinses clean with water or a damp cloth. Behold the power of Hercules, products built to last and trusted by plumbers to withstand even the toughest conditions.
- Self-cleaning, non-petroleum gel-type flux
- Usable on most common metals except aluminum and stainless steels
- Prevents oxidation during heating
- Enhances uniform solder flow to form perfect, leak free joints
- Lead-free and safe for potable water
- Does not freeze or decompose at high temperatures
- Environmentally friendly
- Medium density gas pipe for low pressure gas service
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
The Everbilt Pipe Square Head Plug is the perfect solution when you need to close the end of a copper, brass or iron pipe. The square head design makes installation easy. The plug features durable lead-free, rust-resistant brass construction. This fitting conforms to NSF 61 and 372.
- 10-pieces per package
- Do not overtighten
- Not for use with steel tubing
- California residents see prop 65 warnings
- Not for underground use
- Ideal for gasoline, grease, oil, water, vacuum and air lines
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
The Husky duel use Compression Sleeve and Faucet Handle puller offers a reliable way to remove seized 1/2 in. fittings. With its A3 steel design and zinc coating, this is sure to provide you with the leverage you need. This item is backed by the Husky lifetime warranty and satisfaction guarantee.
- Dual purpose tool
- Easily handles most compression fittings
- Quickly remove faucet handles
- High quality A3 steel construction
- Backed by a lifetime warranty, if your Husky product ever fails, bring it back and we will replace it for free
- Industrial grade
The Everbilt Pipe Square Head Plug is the perfect solution when you need to close the end of a copper, brass or iron pipe. The square head design makes installation easy. The plug features durable lead-free, rust-resistant brass construction. This fitting conforms to NSF 61 and 372.
- 10-pieces per package
- Do not overtighten
- Not for use with steel tubing
- California residents see prop 65 warnings
- Not for underground use
- Ideal for gasoline, grease, oil, water, vacuum and air lines
Installed in a 2 in. PVC white DWV pipe to provide a wall mount connection from a urinal to a 2 in. DWV drainage system. The attachment bolts to connect the urinal and are adjustable from 4 in. to 7 in. Kits come individually packaged withinstallation instructions on header card, plastic urinal flange, foam gasket, stainless steel bolts, washers and nuts.
- 4 in. to 7 in. adjustable center
- Service temperature rated at (140 degree F) +60 degree C
- Normally used in the drainage portion of the DWV system only
- Complete kit eliminates missing or back-ordered parts
- Flange is re inforced with a cross rib to preventthe fork from spreading
- Thick foam gasket provides a positive seal, reducing the potential for leaks
- Use approved PVC primer and solvent cement to make PVC joints
The NIBCO 3 in. PVC DWV 221/2 elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 221/2 elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires the use of a primer before cementing
- Changes direction of piping by 22-1/2 degree
- Compatible with PVC pipe
- Designed for use in non-pressurized sanitary system DWV
- Solvent weld hub x hub connection
- Maximum working pressure of 5 psi
Connect pipes of different types with this brass adapter. This adapter is easy to install and is perfect for gasoline, grease, vacuum, oil, water and air lines. Durable brass construction resists corrosion.
- 10-pieces per package
- Do not overtighten
- Not for use with steel tubing
- California residents see prop 65 warnings
- Not for underground use
- Ideal for gasoline, grease, oil, water, vacuum and air lines
Brass compression unions join pipes of similar or different sizing. They are rated for use in low to medium pressure applications. Included compression inserts are used for soft copper and vinyl tubing.
- 10-piece per package
- Do not overtighten
- Not for use with steel tubing
- California residents see proportion 65-warnings
- Not for underground use
- Ideal for gasoline, grease, oil, water, vacuum and air lines
Use the 4 in. x 3 in. PVC DWV 90 Spigot x Hub Street Closet Elbow to change the size and the direction of the piping in your DWV system. The fitting is made from PVC, which requires a primer before solvent cementing. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- 4 X 3 in. Inside Diameter and 4 1/8 X 3 1/8 in. Outside Diameter
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- 4 in. x 3 in. to help change piping size
- Changes direction of piping 90 degrees
- Solvent welded connections
- Apply a primer to the PVC before cementing
- Maximum working pressure of 5 psi
The NIBCO PVC DWV 22-1/2 degree elbow is used in residential and commercial drain, waste and vent systems. The PVC DWV 22-1/2 degree elbow features a hub x hub connection and is used to change the direction of flow. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- 6 in. Inside Diameter and 6.125 in. Outside Diameter
- PVC construction
- For use with DWV systems to help remove wastewater from plumbing fixtures
- Helps air circulate in drainage piping
- Changes the direction of PVC piping 22-1/2
- Solvent weld connections
- Apply a primer to the PVC before cementing
- "6 I.D. and 6.125 O.D."