Searched for "40101825"

This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Electric or gas water heater use
• 24 in. I.D.
• 25 in. outside diameter
• Recyclable
• Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
• Will not rust or crack
• Helps prevent damage from water leaks
• Made from aluminum

The Rheem Professional Classic 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2 to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Electric water heater is easy to maintain
• Delivers 45 Gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• Over-temperature protector cuts off power in excess temperature situations
• Short tank fits in tight applications
• 0.93 uniform energy factor signifies an energy efficient water heater
• Meets or exceeds NAECA requirements
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested

HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.

• Extremely durable corrugated copper construction
• Built in dielectric sleeves negates the need for a separate dielectric union
• Easily adapts to water heaters with standard male pipe threads
• IAPMO certified
• 3/4 in. size; 24 in. length
• For water use only in accessible locations
• FIP connections; Minimum Bend Radius: 2.5 in.
• Zinc plated nuts
• Thick rubber washer to create a tight seal
• Designed for use in residential and commercial applications for water heater hookups

Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.

• Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
• Easy to install for plumbers/homeowners
• Meets plumbing and real estate codes
• Patented quick link system provides secure frontal attachment
• 24 gauge galvanized steel
• California Division State Architect approval #98-018
• California Division State Architect approval #97-010
• UPC/IPC/IAPMO listed
• Up to 80 gallon water heater
• Hardware included

The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.

• Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
• Easy to install
• Durable braided stainless steel build
• Highly flexible to resist kinks and creases in tight spaces
• Heavy duty nickel plated brass hex nuts are easy to grip
• 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
• 24 in. L
• Lead free and meeting all code requirements
• 5-year warranty

Fluidmaster water heater supply connectors are built to last. Made of a tough core covered with braided stainless-steel wire. These connectors exceed code requirements for durability.

• Exceptional flexibility for fast, easy installation
• Won't kink or crease, even in the tightest of spaces
• Heavy-duty brass hex nuts are easy to grip and nickel plated for durability
• Exceeds all code requirements for flexible water connectors
• 18 in. L
• 3/4 in. FIP x 3/4 in. compression coupling
• Lead free
• 5-year warranty

This thermostat is designed to replAce Therm-O-Disc style 59T/66T thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and UL Listed for the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Built-in safety switch to prevent overheating
• Bulk item - no packaging
• Universal replAcement part

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (2 passes)

This thermostat is designed to replAce Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree by the manufacturer. This item is CSA and Ul Listed from the USA and Canada. Meets specification lengths for most American, AO Smith, Bradford White, Craftmaster, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• I year limited warranty
• Energy efficient range setting
• Application voltage 240/208/277/120/480
• Factory pre-set at 120 degree F
• Adjustable temperature settings
• Therm-o-disc style
• Lower thermostat
• Wiring diagram included
• Universal replAcement part

The Rheem Professional Classic 30 Gal. Electric short water heater provides an ample supply of hot water for households with 1 to 2 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.

• Electric water heater is easy to maintain
• Short tank fits in tight applications
• Delivers 46 Gal. of hot water in the first hour
• Over-temperature protector cuts off power in excess temperature situations
• Dual 4500-Watt heating elements
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• 0.92 uniform energy factor signifies an energy efficient water heater
• 6-year limited warranty on tank and parts for your convenience

The Rheem PROTECH FV Sensor Replacement Kit contains everything that you need to replace the FV Sensor Assembly on your Rheem water heater. This kit is required anytime the FV Sensor is tripped and needs to be replaced. Kit ensures safe and reliable operation.

• Direct replacement for Rheem, ruud and richmond water heaters
• Kit includes: FV sensor and wire tie
• Works on models: PROG40-40N RH67 PV, PROG40-36P RH67 PV, PROG40S-36N RH67 PV, PROG50-42N RH67 PV, PROG50-42P RH67 PV, PROG50S-36N RH67 PV, PROG50-40N RH67 PDV, PRO+G29-60N RH70 ID, PRO+G75-76P RH PV, PRO+G75-76N RH PV, PROG40-36U RH67 PV2, PROG50-38U RH67 PV2
• Genuine oem replacement kit
• 1-year limited warranty
• Packaged with installation instructions
• Easy to install
• Made from ceramic material
• Fix your water heater with peace of mind using genuine Rheem parts
• California residents see prop 65 warnings

The Rheem Performance 38 Gal. Electric short water heater provides an ample supply of hot water for households with 2-people to 4-people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long-lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty plus a 1-year in home labor warranty. A 2.5 in. insulation blanket is included with this model for added efficiency.

• Washington (Effective 1/1/23) and Oregon (Effective 7/1/23) residents: this water heater does not meet demand response requirements, regulations prohibit the sale, shipment or installation of this water heater in a state that requires demand response water heaters
• Your home is in a state that requires demand response water heaters, please select an approved demand response model available on homedepot.com
• Electric water heater is easy to maintain
• Delivers 51 gal. of hot water in the first hour
• 6-year limited warranty on tank and parts for your convenience
• 1-year in home labor warranty for peace of mind
• Short tank fits in tight applications
• 0.92 uniform energy factor signifies an energy efficient water heater
• Adjustable thermostat to adjust water temperature to meet your hot water needs
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Now features a brass drain valve for added resiliency & durability
• Designed for easy replacement of your existing water heater
• Meets 2015 NAECA Standards

SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248

• Can Be Installed On Wet Lines And Pressure Tested Immediately.
• Stainless steel retainer adds strength and durability.
• High-performance DZR lead-free brass body.
• No special tools, crimping, soldering or glue required.

The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.

• Lead free DZR brass fittings, braided stainless steel hose
• Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
• Innovative push-to-connect design makes for quick and easy installation
• Push-to-connect fittings require no solder, glue, unions or tools
• Fitting can be rotated on pipe after installation making it easier to work in tight spaces
• Designed for potable water distribution as well as hydronic heating applications
• Corrosion resistant to improve longevity
• Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
• Meets IAPMO, UPC, IPC, and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. pipe insertion depth = 1-1/8 in.

Keep your hot water heater safely elevated off the ground with the Water-Tite Water Heater Stand. Designed to sit 18 inches off the floor, this durable metal stand helps safeguard gas water heaters with an ignition source from potentially hazardous and flammable materials that may spill inside of garages. It also keeps the water heater safe from flooding and other potentially damaging situations, helping to prolong its lifespan. Choose from a model that measures 21 inches long by 21 inches wide and supports up to 650 pounds or a model that measures 24 inches long by 24 inches wide and supports 1,300 pounds. Each gas heater stand is made of durable 18-gauge galvanized steel and assembles easily (screws and nuts included).

• Galvanized-steel stand for gas water heaters
• Keeps 30- to 50-gallon capacity heaters safely elevated 18 inches off the ground
• Made of rigid 18-gauge steel
• Simple assembly with included screws and nuts
• Available in 650- and 1,300-pound-capacity models
• Designed for heavy duty use
• Stable
• Strong
• Easy assembly
• Steel

The Tough Water Heater pan is the toughest water heater drain pan you can buy. The Pro Series Pan is approved for use with either Electric or Gas Water Heaters. It's made from SecureFLX, which is the safest, strongest and most innovative polymer on the market. This pan line is extremely tough, extremely flexible, and is approved by the ICC to be in compliance with the IPC, UPC, IRC and NSPC.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC, and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

Sharkbite Max Flex Water Heater Connector 3/4" X 3/4"Fip X 12". Mfg #UR3088FX12

• Can Be Installed On Wet Lines And Pressure Tested Immediately.

The Rheem Professional Classic 40 Gal. Electric medium water heater provides an ample supply of hot water for households with 2 people to 4 people. This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection. Factory installed temperature and pressure relief valve and 3/4 in. water connections are included with the water heater for easy installation. This model has a 6-year limited tank and parts warranty.

• 40 Gal. tank provides ample hot water for households with 2 people to 4 people
• Delivers 54 Gal. of hot water in the first hour
• Uniform energy factor 0.93
• Dual 4500-Watt heating elements
• Automatic thermostat keeps water at your desired temperature
• Requires a 240-Volt connection for installation
• Medium tank profile fits in a variety of indoor spaces
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested
• 6-year limited warranty on tank and parts for your convenience
• With ProtectionPlus the 6-year limited tank warranty becomes 10-year

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Storage tank type: storage tank is required to have a recessed tank flange

The Tough Water Heater Pan is the toughest water heater drain pan you can buy. The Pro Series Pan is approved for use with either Electric or Gas Water Heaters. It's made from secureFLX, which is the safest, strongest and most innovative polymer on the market. This pan line is extremely tough, extremely flexible, and is approved by the ICC to be in compliance with the IPC, UPC, IRC and NSPC.

• Approved for use with either gas or electric water heaters
• Virtually indestructible, flexible, self-extinguishing
• ICC-ES approved compliance with the IPC, UPC IRC, and NSPC
• Easy no lift tank installs
• Available in multiple sizes: 21 in., 23 in., 25 in., 27 in., 31 in.
• Made from SecureFLX, which is the safest, strongest and most innovative polymer on the market
• Extremely tough
• Extremely flexible
• Includes custom fitting
• Ideal for all applications

The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.

• Sheath material platted copper sheath and platted steel screw plug
• Volt: 240-Volt
• Watt: 4500-Watt
• Design type high watt density fold back (4-passes)

This thermostat is designed to replace Therm-O-Disc style 59T lower thermostats on residential water heaters. It has adjustable temperature settings, pre-set at 120 degree F by the manufacturer. This item is CSA and UL Listed from the USA and Canada. Meets specification lengths AO Smith, Bradford White, Craft master, GE, GSW, Kenmore, Maytag, Reliance, Richmond, Rheem, Russ, Sears, State and Whirlpool brand water heaters.

• UL and CSA listed
• 1-year limited warranty
• Energy efficient range setting
• Application voltage 240-Volt/208-Volt/277-Volt/120-Volt/480-Volt
• Comes from factory set at 120 degree
• Temperature settings can be adjusted from 90 degree to 150 degree
• Lower thermostat
• Wiring diagram included
• For electric water heaters
• Built in safety switch to prevent over heating

This is a Gas Water Heater Installation Kit by HOME-FLEX. It contains 2-flexible water connectors and one flexible gas appliance connector. This kit makes it easier to install your water heater.

• Kit contains two 3/4 in. FIP x 3/4 in. FIP x 18 in. long corrugated stainless steel water connectors that can be used for both hot and or cold water connections
• Includes 2-compression adapters for making connections to 3/4 in. copper water pipes
• Includes 1-yellow coated gas appliance connector (1/2 in O.D., 3/8 in I.D. x 24 in. long) includes pipe thread adapter fittings. (one for 1/2 in. male and one for 1/2 in. female)
• White thread sealing tape included
• Bright stainless steel finish on water connectors
• Rated for 104,200 CFH flow rating
• Easy to use
• Durable construction
• Full kit
• Uniform Energy Factor (UEF) 0.59

This Camco 30 in. I.D. water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the event of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.

• Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
• Pre-cut side opening for drain fitting
• Aluminum construction
• Electric or gas water heater use
• Rust, corrosion, and crack resistant
• 30 in. insideDia
• 31 in. Dia outside
• Recyclable
• Manufacturer recommends drain pan to be 4 in. Dia larger in than the diameter of the water heater
• Helps prevent damage from water leaks