Searched for "40101600"
Heavy-Duty Round Brass Cap with Neoprene Seal. Brass cap common to HVAC applications. Made of CDA 360 brass.
- Brass construction
- Industry standard cap
- Neoprene seal
- 1/4 in.
Valve core with Teflon seal. Compatible with most refrigerants. Industry standard valve cores.
- Replaces SF1515
- Steel construction
- Use with most refrigerants
- Neoprene seal
Hard start relay and start capacitor, gives additional starting torque up to 500%. For all single phase 120/288VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For severe Low-Voltage or hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 thru 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
SXT105 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT105 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer uses a foot mount design.
- Foot mount
- Primary: 120-Volt / 208-Volt / 240-Volt
- Secondary: 24-Volt
- Output VA: 40 VA
Hardstart relay and start capacitor, gives additional starting torque up to 300% for all single phase 120/288 VAC units from 1/2 through 10 HP. 2 wire connection to existing run cap for easy installation. For low voltage and hard starting compressors.
- Residential and commercial PSC A/C units and heat pumps
- Can be used on 120 through 288 VAC units
- Room A/C units
- Installs in seconds across run capacitor terminals
Heavy-Duty Round Brass Cap with Neoprene Seal. Textured Grip Sides with Handy Core Wrench Top. Designed to fit standard 1/4 in. SAE male refrigeration fittings.
- Made of CDA 360 brass
- Core wrench top
- Neoprene seal
- Manufactured to fit 1/4 in. SAE fittings per ARI 720-97
Hard Start Kit Positive Temperature Coefficient (PTC) Relay and Start Capacitor SPP Series. PTC Positive Temperature Coefficient Relay and Capacitor. NATE Recognized (Course #1867-0002). Can be used on PSC type compressors.
- Easy 2-wire installation
- Increase in torque 600%
- Most economic
- UL recognized
This is a genuine part. Built with durability in mind. Transformer.
- 230-Volt to 24-Volt - for use with GOODMAN and Amana equipment
- Transformer
- Color: gray
- 240-Volt
The only valve with a permanent, patented gasket to provide 50 times more sealing area then standard O-ring type valves. Safe for use on the Low Side of R410 systems. A sealing force of over 180 in. lbs., torque tested with 450 lbs. pressure tested at 250F. Patented valve gasket provides 50 times more sealing area than competitive O-ring types.
- Corrosion resistant
- Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
- 500 psi maximum pressure
- Non-positional mounting, no adapter valve required
- Requires only 2 in. clearance for installation and operation
- Hex key wrench included
Liquid Line Solid Core Filter Drier. 3/8 in. ODF, 4.53 in. X 2.5 in. Flow Capacity (ARI Standard 710.86) Tone at 1 psi Delta P Refrigerant 134a=4.1, R-22=4.4, R410A=4.5, R-404A/R507=2.9. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Hard starts relay and start capacitor combination, gives maximum torque possible for all single phase units from 1/12 through 10 HP. The simple 2 wire connection is Voltage sensing and has instant restart capability. A backup electronic timing circuit protects the compressor.
- Electronic potential relay (EPR) technology and 330 VAC start capacitor
- UL recognized file E146162
- Can be used on PSC and CSIR type compressors
- Voltage sensing 90V-277V
Bi-Directional Solid Core Heat Pump Drier, 3/8 in. ODF 5.63 in. x 2.6 in., R-410A. Flow Capacity Tons at 1 psi Delta P 5.1. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
A versatile transformer that can be used for many different applications. Accepts input voltages of 120 VAC, 208 VAC and 240 VAC and provides a choice of secondary voltages of 2.5 VAC, 8 VAC, 12 VAC, 16 VAC and 24 VAC. Enclosed frame - plate, foot or knock-out mount.
- Primary VAC: 120-Volt/208-Volt/240-Volt
- Secondary VAC: 2.5, 8, 12, 16 and 24
- VA: 48VA
- Dimensions: 2-1/16 in. x 3-1/4 in. x 2-3/4 in.
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
110 VAC to 125VAC Solid-state Hardstart Relay, includes relay, overload and start capacitor. Used refrigeration systems with or without run capacitors. Rated for 1/4 HP to 1/3 HP compressors. Maximum RLA 6.8 Amps.
- Prevents low voltage starting problems
- Replaces relay, overload and provides a boost for hard start and unbalanced systems
- UL recognized
- Made in China
ACS-4 In-line switch is designed to detect condensate drain line clogs or blockages and shut off equipment or alert users to the potential overflow condition. ACS-4 installs on 3/4 in. PVC condensate drain pipe in either a horizontal or vertical position. Using the included 3/4 in. drain pan fitting, ACS-4 can also be installed directly at the drain pan primary or auxiliary outlet to detect pan overflow.
- Installs horizontally or vertically for confined spaces
- Reliable mechanical switch and polymer float
- Shuts off equipment when clog or blockage backs up condensate water in the drain line
- Can be simultaneously be connected to a warning light, audible alarm circuit or BMS/BAS system in addition to connection for equipment shut down
These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs. Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.
- These fittings are designed to meet most all residential, industrial and irrigation/agricultural needs
- Smooth inner walls allow for low pressure drops and resistance to chemicals and corrosion
- Highly versatile, lightweight and easy to install
- White
- Traps (slip x slip)
Liquid Line Solid Core Filter Drier, 3/8 in. ODF, 5.43 ft. x 2.5 in. Flow Capacity (ARI STD 710.86) Tons at 1 psi Delta P Refrigerant 134a=3.8, R-22=4.1, R410=4.2, R-404a/R507=2.7. Economical system protection for residential air conditioning. ODF - solid copper connections for easy installation. Solid core construction with 40 micron filtration. Maximum working pressure = 680 psi. For use with CFC, HCFC, and HFC refrigerants.
- Economical system protection for residential air conditioning
- ODF - solid copper connections for easy installation
- Solid core construction with 40 micron filtration
- Maximum working pressure = 680 psi
- For use with CFC, HCFC, and HFC refrigerants
Ceramic fuse link for HX Fan Coil Units
- Yellow color code
- Opens at 300 degree F
- GSA approved
Operates by hand or with power drill. Cleans 1-1/2" to 3" line. Best used for sink, showers and tub drains. High impact, rust proof plastic drum. 1/4" X 25' galvanized cable with easy to operate keyless chuck . DRILL NOT INCLUDED
The only valve with a permanent, patented gasket to provide 50 times more sealing area then standard O-ring type valves. Safe for use on the LOW SIDE of R410 systems. A sealing force of over 180 in. lbs., torque tested with 450 lbs. pressure tested at 250 degree F. Patented valve gasket provides 50 times more sealing area than competitive 'O' ring types.
- Corrosion resistant
- Piercing needle is engineered for concentricity and hardness to insure perfect seating every time
- 500 psi maximum pressure
- Non-positional mounting, no adapter valve required
- Requires only 2 in. clearance for installation and operation
SXT106 is designed for use in AC Controls Systems including air conditioning circuits, thermostats, gas valves, relays or other applications that do not exceed the listed ratings. SXT106 can be used to replace any transformer of same primary voltage and equal or lower VA ratings. This transformer can use either a foot mount design or a plate/knockout into an electrical box.
- Multi-mount
- Primary: 120-Volt/208-Volt/240-Volt
- Secondary: 24-Volt
- Output VA: 40-Volt-Amp
2 tools in 1. A core wrench and thread chaser cap, complete with a core carrying case and 6 cores. The valve cores are stainless steel and brass. The cores are rated for CFC, HCFC and HFC refrigerants. The cores are pressure rated for R410A and manufactured to ARI 720-97 standard.
- Carrying case can hold several additional cores
- Multi-use tool acts as cap for carrying case
- Length: 3.5 in.
- 6 valve cores included
Fusible link assemblies are safety devices mounted in ceramic holders. Tear drop shaped ceramic holders with a screw mounting hole at the small end and two 1/4" quick connects for convenient hook-up.
- Open: 300 degree F