Specialty Measurement Tools

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The Stop Shock II Circuit Analyzer makes it easy to test GFCI receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10ohms) on ground wire and provides a clear and easy-to understand single LED readout indication for correct wiring or Bad Ground, Open Neutral, Hot/GND Reverse, Hot/NEU Reverse and Open Hot wiring errors without the need to memorize or decipher a dual-indication chart. The Stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features Hi-impact ABS housing with a 250 lb. crush rating and the ability to withstand drops of up to 10 ft. Backed by a lifetime warranty this tool will speed up the testing process and increase your productivity for years to come.

• Bright 360 degree viewable LED indicator light
• Single LED provides immediate indication of the wiring error, no need for a chart to carry, memorize or interpret
• Advanced ground testing circuitry precisely detects the required low resistance values
• Hi-impact ABS housing withstands a 10 ft. drop and offers a 250 lbs. crush rating
• Limited lifetime warranty

The ET110 CO Detector is an easy-to-use meter that detects and measures concentration levels of carbon monoxide (ppm) and temperature (Fahrenheit/Celsius), making it the perfect choice for HVAC professionals. Features backlit LCD screen, warning indicator light, audible and visual alarms and multiple function buttons. Includes carrying pouch and 4 x AAA batteries.

• Easy-to-use CO meter detects and measures concentration levels of carbon monoxide gas
• Portable CO detector with user protection and short-term exposure limit (STEL) alarm
• Low level alarm (35 ppm) and high level alarm (200 ppm)
• Audible and visual alarms
• Backlit display with CO measurements (0 to 1000 ppm) and temperature (Fahrenheit and Celsius)
• Auto-power off after 20 minutes of no usage helps conserve battery life
• Includes carrying pouch and 4xAAA batteries
• Meter is NOT intended for use as personal protection equipment

Klein Tools CL700 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Electronic Tester's clamp measures AC current and its thermocouple probe measures temperature
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
• Built to withstand a 6.6-Foot (2 m) drop
• Low battery indicator and easily accessible battery compartment
• Includes a carrying pouch, test leads, thermocouple with adapter and batteries
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
• Operating Temperature: 32-degrees F to 104-degrees F (0-degrees C to 40-degrees C)
• Operating altitude to 6562-Foot (2000 m)

Klein Tools ET130 is an easy-to-use precision light meter that measures illuminance levels in both Foot Candles (FC) and Lux. Backlit LCD display screen with bar graph assists when monitoring light levels and for retrofit projects. Includes custom carrying pouch and 9V battery.

• Easy to operate light meter to monitor light levels
• Measurements in foot candles (FC) and Lux
• Auto and manual range: 4000 FC, 40,000 lux
• Features backlit LCD display with 40-segment bar graph
• Data hold, maximum/minimum and auto power off
• Includes carrying pouch and 9-Volt battery

Klein Tools CL600 Electrical Tester is an automatically ranging true mean squared (TRMS) digital clamp meter measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, and tests diodes via test-leads. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Amp Clamp measures AC current
• Test leads measure AC/DC voltage, resistance, continuity and tests diodes
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
• Built to withstand a 6.6-foot (2 m) drop
• Low battery indicator and easily accessible battery compartment
• Includes carrying pouch, test leads and batteries
• Operating altitude to 6,562-Foot (2,000 m)
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Tools CL800 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools' Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Thermocouple probe measures temperature
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
• Built to withstand a 6.6 ft. (2m) drop
• Low battery indicator and easily accessible battery compartment
• Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C)
• Operating altitude to 6562 ft. (2000m)
• Includes carrying pouch, test leads, thermocouple with adapter and batteries
• Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations