Water Heater Accessories
Superior full port potable water connectors for water heaters and water treatment. Connectors are more bendable and flexible than copper. They will not discolor, corrode, rust, crimp or kink.
- Best for installation water heaters and water softeners
- Product made of corrugated stainless steel
- This product has no plastic hose or insert to reduce flow
- Product is environmentally friendly
- Lifetime warranty
- Flows more than any other type
- Will not burst
- High temp EPDM washer
- Resists work hardening
- Working pressure 200 psi
- Burst pressure approximately 1850 psi
- 100% leak tested
- No sweat installation
- Temperature rating -40 degree F to 250 degree F
- Bright annealed
The plastic hood termination can be used to conceal PVC/CPVC piping to provide a clean, sleek finish to your venting system. The product itself is made out of PVC material. It is ideal for horizontal terminations.
- 3 in. PVC compatible
- 4 in. PVC compatible
- Not approved for Canada
- 1 year warranty
- 3 in. CPVC compatible
- 4 in. CPVC compatible
- Weather resistant
- For horizontal terminations
- Prevents heavy rain and snow entering water heater
- Prevents debris from entering water heater
3/4 in. Lead free Isolation valve kit with female threaded connections. Valve kits are an essential component for heater service and should be installed on all tankless water heaters. This fits all NORITZ models except NC132M/NC380 and NCC300. Fits all other tankless brands with 3/4 in. inlet and outlet.
- Includes pressure relief valve
- TH denotes threaded connection
- Double wall vent type
- ULC-S636 approved for use in Canada
- No need to shut off your water line
- Pressure relief valve has been rated for 500,000 BTUH
- Isolation valve is made of stainless-steel material, providing for extended product durability
- Kit is compatible with all residential NORITZ heaters
- Warranty is included in installation manual
- Installation is fast and easy
The Robertshaw 110 Series Water Heating Gas Valves are designed for universal replacement applications in water tanks. All models feature a built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. The ECO is designed to detect over-temperature conditions and to open. Once opened, the control will not function and a new replacement will be required.
- Outlet size: 1/2 in. inverted flare
- Pressure regulation: 4.0 in. WC natural gas
- Shank length: 1-3/8 in.
- Inlet size: 1/2 in. pipe
- Flow setting: 45,000 BTU
- Temperature: 160 degree F (71 degree C)
- Gas type: NG
- Sensing element: 5-1/2 in.
- Pressure tap: manifold
- Mounting: 3/4 in. NPT
- Domestic, commercial and recreational vehicle applications
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Fits model: PROG50S-40N RH61
- Kit includes: Gas Valve and Installation Instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of durable steel and plastic
- 1 year limited warranty
- Repair your water heater with peace of mind using genuine Rheem parts
- California residents see prop 65 warnings
The 1-1/4 in. DUXLC Dielectric Union is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the DUXLC include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The DUXLC comes standard with a female iron pipe x female copper sweat joint.
- Multiple size options for versatile installation
- Couples dissimilar piping materials for ultimate convenience and low installation costs
- High protection from piping deterioration
- Female iron pipe x female copper sweat connection comes standard
- Certified to NSF/ANSI 372 by IAPMO R and T
- Used with water heaters
- Easy to install
- For use with potable water
- Female sweat
- Bronze/Copper Metallic Finish
Residential condensate neutralizer for all EZ, NRC and NRCP Series only. The NC-1S is ideal for neutralizing condensate from condensing boilers and furnaces operating on natural gas or propane. The condensate is acidic and has the potential to harm the environment and the sewer system. The NC-1S will raise the pH of the condensate to a more neutral level before it is discharged to drain.
- Low profile design - provides ease of installation and can be mounted in a horizontal or vertical position mounted in a wall cavity and rated for zero clearance to combustibles
- Kit can be used with or in place of the built-in neutralizer sewer system
- Kit includes 3 in. PVC 90 degree elbow and a special anti-contaminant screen that fits directly onto the intake flue for a simple installation
- Design type high watt density fold back (4 passes)
- Includes 1 liter capsule with two 3" fill/access openings
- Suitable for use on all types of Natural Gas and Propane appliances
- Helps maintain a neutral environment for bacteria in septic systems
- Made of corrosion resistant materials
- Includes initial charge of neutralizing agent
- Extended bottom flange
- Fast and easy installation
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 15 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 15 in. L; Minimum recommended bend radius: 2.5 in.
- Sweat x FIP connections
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
The Camco flared dip tube is a non-metallic tube that directs incoming cold water into a water heater. It directs water to the bottom of the tank so that the water in the upper part of the tank will stay warm. It can be cut to desired length if too long. The gasket is included.
- Water inlet dip tube
- 52 in. vertical length
- Can be cut to desired length
- Gasket included
- No-break poly resin
- PEX material
- Directs cold water to the bottom of the water heater
- Flared opening
- Non-metallic
- Anti-siphon hole breaks damaging siphon action
2 in. flex vent kit that extends 35 ft. It is compatible with EZ98DV, EZ111DV and EZTR40 tankless models. This kit is intended for installation through an existing B-vent. It contains a step by step start up guide. EZ2-CK flex vent conversion kit must also be purchased to ensure proper installation. EZ2-CK must be purchased in order to properly install this flex vent kit.
- EZ2-CK must also be purchased for proper installation
- Kit is only for vertical terminations
- Optional venting for EZ series heaters
- Flexible polypropylene venting included
- Additional accessories to complete the venting application
- Flex vent is up to 35 ft.
- Easy to install
- Contains rain cap
- Not allowable for horizontal terminations
- Vent through existing B-vent
- Designed only for installation inside of B-vent wall
- Cannot be installed outdoors
- Compatible with EZ98DV, EZ111DV, and EZTR40 models
Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to 8 tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.
- Roof flashing - shingle 6/12 in. to 12/12 in. pitch
- For use with Rinnai tankless water heaters
- Dimensions: 5.5 in. x 17 in. x 13 in.
- Water heater accessory
- Country of origin: Netherlands
- Tankless water heaters (condensing) and M-series boilers
- Black finish
- Package quantity: 1
- 1-year limited warranty
- *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.
The Rheem PROTECH Gas Control Replacement Kit contains everything that you need to replace the Gas Valve on your Rheem gas water heater. The part is required anytime the cag control is damaged or needs replacing. The gas valve kit ensures the safe and reliable operation of your gas water heater.
- Direct replacement for Rheem, Ruud and Richmond gas water heaters
- Works on models: PROG50-42N RH67 PV
- Kit includes: gas valve and instructions
- Use only on Rheem water heaters
- Genuine OEM replacement kit
- Robust design
- Made of steel and plastic
- Repair your water heater with peace of mind using genuine Rheem parts
- 1 year limited warranty
- California residents see prop 65 warnings
The SharkBite Heat guard 110-D is a Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120° F maximum. The Heat guard 110-D is designed to assist in the prevention of scalding. The SharkBite Heat guard 110-D valve delivers water at a maximum of 120° F, allowing the heater to be set at 140° F or higher, thus providing a greater effective volume of hot water.
- Instant push-fit connection for increased ease of use
- No soldering, glue or tools required
- Allows the heater to be set at 140°F or higher allowing for greater effective hot water volume and less chance of legionella within the cylinder
- Robust, low complexity construction means superior reliability and improved user safety
- Delivering hot water at a controlled temperature
- Lead free
The Rheem PROTECH Flared Dip Tube will help keep water heaters working and in peak condition. Dip Tubes direct water to the bottom of the tank for heating efficiency. Smooth water flow for quiet operation.
- Direct replacement for Rheem, Ruud and Richmond water heaters
- Works on models: PROG40-38N RH62
- Fits most brands: Rheem, Ruud, Richmond, GE, State, Kenmore, Bradford White, AO Smith, American, Craftmaster, Lochinvar, Reliance, GS Wood, Mor-Flo and Whirlpool
- 36 in. L
- Gasket included
- Durable PEX construction
- Easy to install
- Helix output flow creates a vortex that helps clear the water heater of sediment buildup
- 1 year limited warranty
- Genuine OEM quality
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
The 3/4" DUXLM Dielectric Union Pipe Fitting with is utilized on potable water applications for protection against piping system deterioration caused by galvanic and stray current corrosion. Required where dissimilar metals are used in piping systems, materials for the 3/4" DUXLM include a zinc-coated steel body, union nut, bolts, and nuts, as well as cast steel flanges, low lead brass tailpiece, nylon insulator, and EPDM gaskets. Its maximum working water pressure is 250 psi for threaded fittings and 175 psi for flanged fittings, with a 180 degree F maximum working water temperature. The 3/4" DUXLM comes standard with a male iron pipe x female copper sweat joint.
- Flexible design couples dissimilar piping materials for ultimate convenience
- Designed for lasting wear on potable water applications
- Protects against pipe deterioration from galvanic and stray current corrosion
- Zinc-coated steel body resists corrosion
- Male iron pipe x female copper sweat
- Union nut steel with zinc coat
- Tailpiece low lead brass
- Bolts and nuts steel with zinc coat
- Insulator nylon
- Certified to NSF/ANSI 372 by IAPMO R and T
The 1/2 in. x 24 in. SharkBite Water Heater Connector allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The braided stainless-steel connectors are available in different lengths from 12 in. to 24 in. (18 in. Available with Integrated Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect water heater to any combination of copper, PEX, or CPVC pipe
- Innovative push-fit design makes for quick and easy installation
- Push-fit connections require no solder, glue, or unions
- Decreases the amount of time and effort needed to connect water heater to pipe
- Demount clip allows user to release the pipe from the fitting if mistake is made (sold separately)
- Corrosion resistant to improve longevity
- Design certified and listed to ASSE 1061 and NSF/ANSI 372-2010 and NSF/ANSI 65
- Meets IAPMO, UPC, IPC, and cUPC requirements
- 1/2 in. Pipe Insertion Depth = 15/16 in.
Precisely engineered accessories can add even more reliability, convenience and flexibility to Rinnai Tankless Water Heaters. With Rinnai Common Venting, up to eight tankless water heater units share the same vent system. This allows for significantly fewer wall or roof cuts, less labor, and longer vent lengths than ever possible with single-unit tankless water heater venting.
- Concentric venting reduces install time and costs
- Engineered concentric venting especially for gas appliances
- Easy assembly/adjustment
- Concentric venting allows for secure connection
- 5 in. condensing horizontal termination kit 21 in
- HE series tankless water heaters (non-condensing)
- White finish
- Package quantity: 1
- Plastic construction
- 1-year limited warranty
- *Note. Rinnai is changing the language in its warranty terms and conditions found in the current User Installation manuals. The existing statement will be replaced by the following: "This Limited Warranty applies only to products that are installed in the United States and Canada. Improper installation may void this Limited Warranty. It is recommended that a trained and qualified professional who has attended a Rinnai installation training class complete your installation." All warranties (old or new manual) will be honored as written above.
The Rheem PROTECH T and P (Temperature and Pressure Relief) Valves are designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in. NPT male inlet and 3/4 in. NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Temperature Relief: 210 degree F (99 degree C), Pressure Relief Range: 75 to 150 psi (5.2 to 10.3 bar).
- Direct replacement for Rheem, Ruud and Richmond water heaters
- Fits most brands including American, AO Smith, Bradford White, craftmaster, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, State and Whirlpool water heaters
- ASME rated and CSA listed
- Features a unique thermostat with special thermo-bonded coating
- Thermostat is accurate and proven
- Stainless steel spring
- 4 in. thermostat element
- 1 year limited warranty
- Genuine OEM quality
- Robust construction
- California residents see prop 65 warnings
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- MIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
NORITZ flex vent 2 in. kit, 35 ft. for EZ98DV and EZ111DV. This kit is for installation through existing B-vent. It contains step-by-step start up guide.
- Kit is only for vertical terminations
- Optional venting for EZ series heaters
- Flexible polypropylene venting included
- Additional accessories to complete the venting application
- Up to 35 ft.
- Easy to install
- Cuts installation time in half
- Contains rain cap
- Not allowable for horizontal terminations
- Vent through existing B-vent
Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Tapered pipe threads are manufactured to exacting quality and standards. This pipe fitting is easy to use for both contractors and the do-it-yourself.
- FIP x SWT
- 5 years warranty against defect
- Prevents corrosion caused by joining 2 dissimilar metals
- For residential use
- For commercial use
- For industrial use
- High quality standards
- Easy to install
- Long lasting
- Helps prevent galvanic corrosion when connecting copper and galvanized steel
Rheem's Burner Assembly Replacement Kit contains everything that you need to replace the burner assembly on your Rheem gas water heater. The kit is required anytime the burner assembly needs to be replaced. Kit ensures safe and reliable operation.
- For use on Rheem and Ruud water heaters
- Works on PROG50-42N RH67 PV
- Genuine OEM replacement part
- 1 year limited warranty
- Burner assembly is made from steel and other durable, high temperature materials
- Fix your water heater with peace of mind using genuine Rheem parts
- Easy installation
- Developed for use with Rheem water heaters
- California residents see prop 65 warnings