Water Heater Accessories
The HOLDRITE expansion tank bracket is a secure and easy method for mounting an expansion tank. This universal bracket is constructed of galvanized stainless steel. Tanks of up to 5 Gal. and up to a 13 in. Dia can be supported.
- Secures expansion tank to wall
- Galvanized and stainless steel construction
- Supports tanks up to 13 in. Dia
- Supports tanks up to 5 Gal.
- Includes mounting bracket, 2 support straps and mounting screws
- Quick-release stainless steel bands
- Fast and easy installation
- Takes load weight off pipes
- HOLDRITE quick strap brand
- Water heater accessories
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 24 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products, due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves, it is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size
- 24 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4" FIP connections
- Chrome plated brass supply nuts.
- Soft, thick rubber washer to create a tight seal. Follow instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
The Home-Flex 3/4 in. FIP x 3/4 in. FIP x 18 in. L Stainless Steel Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is more flexible when compared copper corrugated products due to its kink-free installation. Engineered of flexible lead free stainless steel, attached end fittings and built-in dielectric sleeves. It is the ideal choice for both homeowners and contractors. Extremely durable corrugated stainless-steel construction. Built in dielectric sleeves negates the need for a separate dielectric union Easily adapts to water heaters with standard male pipe threads IAPMO certified.
- Extremely durable corrugated stainless-steel construction
- Built in dielectric sleeves eliminates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- Corrugated stainless steel tubing is .01 in. / 25mm thick
- 18 in. L; Minimum recommended bend radius: 2.5 in.
- 3/4 in. FIP connectors
- Chrome plated brass supply nuts
- Soft, thick EPDM rubber washers to create a tight seal. Follow installation instructions carefully and do not over tighten.
- Designed for use in residential and commercial applications for water heater hookups
- For use with water only in accessible locations
- Conforms to ASME A112.18.6/CSAB125.6
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2-passes)
HOME-FLEX 3/4 in. MIP x 3/4 in. FIP x 24 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 24 in. length
- For water use only in accessible locations
- FIP connections; Minimum Bend Radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
This Camco 24 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 24 in. I.D.
- 25 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
Holdrite Quick Strap water heater restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment, making Quick Strap a superior seismic mounting solution. Holdrite Quick Strap is preferred by Do It Yourself, Do It for Me, and professional contractors because it provides the highest quality, safest and easiest installation.
- Most tested and recognized water heater restraint
- Soft-belt style water heater strap kit
- Supports up to 80 Gal. water heaters
- Includes self-drilling wall anchor hardware
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 24 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
- Supply line type
- 1.25 in. width, .4 lbs. wide
- Under lifetime warranty
- Silver color
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Material type constructed of rubber material
- Design type high watt density fold back (2 passes)
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 4500-Watt
- Design type high watt density fold back (2 passes)
The Fluidmaster B1H24 Braided Stainless Steel Water Heater Connector is a top choice to replace and upgrade your water heater supply line. Showcasing a 24 in. length and fitting 3/4 in. FIP x 3/4 in. FIP fittings. Fluidmaster water heater water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors come with a 5-year warranty. Featuring exceptional flexibility for fast and easy installation, with easy to grip and durable nickel-plated brass hex nuts, and extra-long and crimped stainless ferrules. They won't kink or crease even in tight spaces. Lead free and meeting all code requirements for flexible water connectors.
- Trust Fluidmaster to replace old, or faulty water heater connectors with a flexible upgrade
- Easy to install
- Durable braided stainless steel build
- Highly flexible to resist kinks and creases in tight spaces
- Heavy duty nickel plated brass hex nuts are easy to grip
- 3/4 in. F.I.P. x 3/4 in. F.I.P. fitting
- 24 in. L
- Lead free and meeting all code requirements
- 5-year warranty
The Camco 11460 22 in. Water Heater Drain Pan is used under an electric water heater to prevent damage to floors or other finished areas in the event of a water heater leak or runoff from the release valve tube. It is made of durable polypropylene plastic that will not corrode or crack. There is a pre-cut side outlet for the drain fitting used to plumb any water away from finished surfaces. Recyclable and non-toxic.
- 22 in. I.D.
- 24 in. O.D.
- For electric water heater only
- Side opening for drain fitting
- Includes 1.0 in. x 1.5 in. CPVC drain fitting kit
- Durable polypropylene construction
- Will not rust, corrode or crack
- Black color
- Tools required for drain installation
- 1-year limited warranty
This Camco 22 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 22 in. inside diameter
- 23 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Fitting included
SharkBite Max Elbow 1/2". Can be rotated after installation. No tube liner required for PEX. Mfg #UR248
- Can Be Installed On Wet Lines And Pressure Tested Immediately.
- Stainless steel retainer adds strength and durability.
- High-performance DZR lead-free brass body.
- No special tools, crimping, soldering or glue required.
The NCLX-5LX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. Test lever standard. Temperature relief setting is 210 degree F (99 degree C).
- Provides effective isolation from mineral deposits and galvanic corrosion
- Completely automatic and reseats after temperature or pressure relief
- Every valve is tested for performance prior to shipping
- Listed by CSA and ASME
- Factory set at 150 psi
- Maximum temperature of 210 degree F
- Male inlet
- Female outlet
- Cast bronze body
- Brass and stainless steel internal parts
Cleans heater coils thoroughly. Restores pressure and circulation in minutes, with no strong odor. Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients. It is easy to use and works twice as fast as other cleaners. Use it for routine cleaning to remove calcium and other solid deposits from heating coils.
- Calci-Free tankless water heater flush cleans heater coils thoroughly, restores pressure and circulation in minutes, with no strong odor, Calci-Free is a unique, economical, biodegradable cleaner containing a combination of organic, inorganic and corrosion inhibiting ingredients, it is easy to use and works twice as fast as other cleaners
- More effective than vinegar
- Easy to use no strong odor
- Cleans heat exchanger fast
The Homewerks Dielectric Union prevents electrolysis or galvanic action when connecting dissimilar materials. Pressure rated at 150 psi at 180 degree F. Complies with 0.25% weighted average lead content on wet surfaces.
- 3/4 in. dielectric union
- Prevents electrolysis or galvanic action when connecting stainless steel and copper pipe
- Pressure rated at 150 psi at 180 degree F
- Complies with 0.25% weighted average lead content on wet
- Compatible with copper and steel
- Components of this union are not interchangeable with other manufacturer's unions
- FIP x SWT
Falcon Stainless Connector with 3/4 in. Female Iron Pipe by a 3/4 in. Female Iron Pipe and 18 in. in length. This Flexible Stainless Steel Corrugated connector is for use on both Water Softeners and Water Heaters. Easy to install.
- 304 series stainless steel
- Extremely flexible
- Will not corrode or rust
- High temp EPDM washer chlorine and chloramine resistant
- Highest flow rate in the industry - no restrictions
- 100% leak tested
Holdrite quick strap Water Heater Restraints are the most tested, approved and recognized water heater restraints in the market. The patented Quick Link system provides secure frontal attachment making quick strap a superior seismic mounting solution. Holdrite quick strap is preferred by DIY, DIFM and professional contractors because it provides the highest quality, safest and easiest installation.
- Water heater restraint to protect against natural disasters: earthquakes, tornadoes and hurricanes
- Easy to install for plumbers/homeowners
- Meets plumbing and real estate codes
- Patented quick link system provides secure frontal attachment
- 24 gauge galvanized steel
- California Division State Architect approval #98-018
- California Division State Architect approval #97-010
- UPC/IPC/IAPMO listed
- Up to 80 gallon water heater
- Hardware included
The Rheem PROTECH SP8346 T and P (Temperature and Pressure Relief) Valve is designed to protect water heaters from overheating and over-pressurization. It is a component that is integral to the safe operation of the water heater. The valve features a bronze body with 3/4 in. NPT male inlet and 3/4 in. NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. Temperature Relief: 210 degree F (99 degree C), Pressure Relief Range: 75 to 150 psi (5.2 to 10.3 bar).
- Direct replacement for Rheem, Ruud and Richmond water heaters
- Fits most brands including American, AO Smith, Bradford White, Craftmaster, General Electric, GS Wood, Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Sears, State and Whirlpool water heaters
- ASME rated and CSA listed
- Features a unique thermostat with special thermo-bonded coating
- Thermostat is accurate and proven
- Stainless steel spring
- Body length of 4.25 in.
- 3 in. thermostat element
- 1 year limited warranty
- Genuine OEM replacement part
HOME-FLEX 3/4 in. FIP x 3/4 in. FIP x 18 in. L Copper Corrugated Water Connector is designed for use in residential and commercial applications for water heater hookups. It is flexible, corrosion resistant and has attached end fittings with built-in dielectric collars. It is the ideal choice for homeowners and contractors alike.
- Extremely durable corrugated copper construction
- Built in dielectric sleeves negates the need for a separate dielectric union
- Easily adapts to water heaters with standard male pipe threads
- IAPMO certified
- 3/4 in. size; 18 in. length
- For use with water only in accessible locations
- FIP connections; Minimum recommended bend radius: 2.5 in.
- Zinc plated nuts
- Thick rubber washer to create a tight seal
- Designed for use in residential and commercial applications for water heater hookups
- Conforms to ASME A112.18.6/CSAB125.6
This Camco 26 in. ID water heater drain pan is designed to be installed underneath a water heater. It is used to protect floors in the even of a leak or drips from the runoff tube. It is made of aluminum and will not rust or crack. It can be used for gas or electric water heaters.
- Included PVC drain fitting will fit 1 in. or 1.5 in. drain pipes
- Pre-cut side opening for drain fitting
- Electric or gas water heater use
- 26 in. inside diameter
- 27 in. outside diameter
- Recyclable
- Manufacturer recommends drain pan to be 4 in. larger in diameter than the diameter of the water heater
- Will not rust or crack
- Helps prevent damage from water leaks
- Made from aluminum
The Backer EHP Inc. copper based sheathed water heater available in both high and low watt densities provides a great solution for heating water with our completely tinned sheath and screw plug design to minimize galvanic action. Multiple water heater manufacturers now use this type of sheathed element as original equipment. Available replacements are the standard square flange and the straight thread screw plug.
- Sheath material platted copper sheath and platted steel screw plug
- Volt: 240-Volt
- Watt: 3500-Watt
- Design type low watt density fold back (4 passes)
The 3/4 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
- Lead free DZR brass fittings, braided stainless steel hose
- Use to connect to any combination of copper, PEX, CPVC, or PE-RT pipes
- Innovative push-to-connect design makes for quick and easy installation
- Push-to-connect fittings require no solder, glue, unions or tools
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces
- Designed for potable water distribution as well as hydronic heating applications
- Corrosion resistant to improve longevity
- Listed by IAPMO and design certified and listed to ASSE 1061/NSF 61
- Meets IAPMO, UPC, IPC, and cUPC requirements
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
- Rated to 200 degree F and 200 psi
- 3/4 in. pipe insertion depth = 1-1/8 in.