Angle Stops

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The Homewerks 1/2" NOM Comp x 3/8" OD Comp Multi-Turn Angle Shut Off Valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve from Homewerks.

• 1/2 in. nominal compression x 3/8 in. O.D. compression
• Multi-turn handle
• Compatible with copper
• Chrome plated finish
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• Limited lifetime warranty
• IAPMO cUPC, NSF/ANSI/CAN 61 and Lead Free certified

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• 1/2 in. pipe insertion depth = 15/16 in.

With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home. 100% leak tested to ensure reliable, leak-free performance. 1/2 in. Nom Comp Inlet x 3/8 in. O.D. Comp Outlet 1/4-Turn Angle Ball Stop.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
• Precision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use
• Blow-out proof, plated stem is assembled from the inside with double O-rings to help ensure safe, reliable performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested to ensure reliable, leak-free performance
• Temperature rating: 40 to 180 degree F
• Pressure rating: 125 psi maximum
• IAPMO ASME A112.18.1/CSA B125.1

The Apollo ExpansionPEX 1/2 in. Chrome-Plated Brass PEX-A Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Individually bagged
• Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC and cUPC standard
• Barb x compression connection for PEX plumbing systems
• NSF listed
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Straight Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x compression connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shutoff and re-opening
• IAPMO and CSA Listed
• Certified to ANSI / NSF standard 61-9 Annex G
• Manufactured in an ISO accredited facility

The Homewerks 1/2 in. FIP x 3/8 in. O.D. compression multi-turn angle shut-off valve controls water flow to a plumbing fixture. It is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture without having to turn the water off to the entire home.The brass construction is durable and corrosion-resistant. Bring quality and efficiency to your project with this angle shut-off valve from Homewerks.

• 1/2 in. FIP x 3/8 in. O.D. compression
• Multi-turn handle enables rapid and safe flow control in cold water pipes
• Compatible with iron pipe
• Chrome finish
• Limited lifetime warranty
• Maximum pressure rating of 125 PSI at 180 degrees Fahrenheit
• NSF/cUPC/ANSI 61 certified

The Tectite by Apollo 1/2 in. Push-To-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve is designed to control water flow to plumbing fixtures such as toilets and faucets. The Angle Stop Valve is used where the water pipe enters the room to allow for easy shut-off of water flow to the end fixture allowing for maintenance and repair without having to turn water off to the entire home. The 3/8 in. O.D. male compression outlet allows for the integration of supply lines for connection to the end fixture. Tectite by Apollo push-to-connect stop valves are the cleanest and simplest way to gain flow control on copper, CPVC, PE-RT and PEX pipe without the use of tools, solder, open flame or glue. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Stop valve removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, fittings may be rotated for simpler installation in tight spaces. All Tectite by Apollo stop valves are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) chrome-plated brass for superior reliability
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper or CPVC pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Listed by IAPMO and listed to ASSE 1061/NSF 82
• Meets UPC, IPC, and cUPC standard requirements
• Demount clip allows for fitting removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

BrassCraft 1/2 in. Nom Compression Inlet x 3/8 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined, 1-piece body construction for strength, durability and long-lasting performance
• 1/2 in. nom comp inlet x 3/8 in. O.D. comp outlet multi-turn angle stop
• Compatible with copper
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 160 degree F
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1

This multi-turn angle stop features a solid brass construction, a brass finish and a brass stem. All of its features comply with state lead-free requirements and NSF 61-9 standard. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.

• Made of brass
• Angle valve
• Lead free
• Rough brass
• Zinc oval handle
• Brass stem

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

BrassCraft 1/2 in. Nom Sweat x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with copper
• Machined, 1-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Temperature rating: 40 degree to 140 degree F
• Oval-knurled handle provides a secure grip for on/off operation
• Pressure rating: 125 psi maximum
• IAPMO and CSA Listed to ASME A112.18.1 / CSA B125.1

SharkBite Push-to-connect stop valves are the fastest way to connect to PEX, copper, CPVC, or PE-RT stubouts. These valves control the flow of water to plumbing fixtures including faucets, toilets, dishwashers, washing machines, and ice makers. Braided supply lines, PEX, or copper tubing can be used to connect the outlet of the valve to plumbing fixtures. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings and valves can be easily changed or reused Designed with stainless steel gripping teeth for a secure connection, chlorine-resistant O-ring for a long-lasting seal.

• Works on wet lines, rotatable after installation, and removable
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 160 degrees Fahrenheit and 125 PSI
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Chrome-plated exterior body
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 2-Year warranty when used with PEX, copper, CPVC & PE-RT pipe

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility

1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet Multi-Turn Angle Stop with Brass Stem. Machined, 1-piece body construction for strength, durability and long-lasting performance. Easy-to-remove handle protects against accidental operation during rough-ins.

• Compatible with copper or PEX (PEX installations require a stainless steel tube insert)
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• For indoor use
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• No-lead certified
• IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

1/2 in. Nom Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Machined one-piece brass body provides strength, durability and long-lasting performance
• For use in potable water distribution systems; not intended for recirculating water systems that produce continuous use temperatures above 115 degree F; for those applications, use our KT series ball stops
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Easy-to-remove handle protects against accidental operation during rough-ins
• 1-piece shut-off mechanism provides smooth on-off operation
• IAPMO ASME A112.18.1/CSA B125.1
• Designed, machined and assembled in the USA

BrassCraft 1/2 In. Nom Sweat x 3/8 In. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop or start the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.

• Compatible with Copper
• Machined, one-piece body construction for strength, durability and long-lasting performance
• Easy-to-remove handle protects against accidental operation during rough-ins
• Easy-to-remove handle protects against accidental operation during rough-ins
• Multi-turn operation means water flow control with only a few turns of the handle
• Oval-knurled handle provides a secure grip for on/off operation
• Rough brass
• Temperature rating: 40 to 140 F
• Pressure rating: 125 psi maximum
• No-Lead Certified
• IAPMO and CSA listed to ASME A112.18.1 / CSA B125.1
• Designed, Machined and Assembled in the USA

The Apollo ExpansionPEX 1/2 in. Chrome-Plated Brass PEX-A Barb x 3/8 in. Compression Quarter-Turn Straight Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Individually bagged
• Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system
• Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
• Cold-expansion tool (sold separately) is required for installation
• Meets or exceeds ASTM F1960 standard
• Meets UPC, IPC and cUPC standard
• Barb x compression connection for PEX plumbing systems
• NSF listed
• Rated to 200 degree F and 200 psi
• Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems

1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. 1-piece machined brass construction which is suitable for use in both hot and cold water applications. Available in chrome, polished brass and rough brass finishes.

• Forged brass body for durability
• Chrome plated finish offers decorative appearance
• Ball valve design provides reliable shut-off and re-opening
• IAPMO and CSA listed
• Certified to ANSI/NSF standard 61-9 annex G
• Manufactured in an ISO accredited facility