Stop Valves
BrassCraft 3/8In. OD Female Compression Inlet x 3/8 In. OD Compression Outlet 1/4-Turn Straight Ball Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a quarter turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Machined one-piece brass body provides strength, durability and long-lasting performance
- 3/8 in. Nom Female Comp Inlet x 3/8 in. OD Comp Outlet
- Compatible with copper pipe
- For use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115 degree F
- Machined body provides strength, durability and long-lasting performance
- Easy-to-remove handle protects against accidental operation during rough-ins
- Plated stem provides corrosion resistance and prevents o-ring damage. Metal handle is designed for durability, corrosion resistance & a sleek appearance
- 100% leak tested to ensure reliable, leak-free performance
- For indoor use
- Temperature rating: 40 degree to 180 degree F
- Pressure rating: 125 psi maximum
- IAPMO listed to ASME A112.18.1 / CSA B125.1
The future is here with Viega PureFlow Press. As the leader in press technology, Viega was the first to offer a true press system to the PEX market. Available in sizes from 3/8 in. to 2 in.
- Factory assembled fittings reduce installation errors on the job site
- Viega smart connect technology for PureFlow press polymer helps identify unpressed connections
- Available in 2 materials, proprietary zero lead bronze and high-performance polymer
- System matched tools provide a consistent connection every time
- NSF 14 and NSF61-G approved for potable water systems and suitable for radiant heating systems
- Press connection, compression
The future is here with Viega PureFlow Press. As the leader in press technology, Viega was the first to offer a true press system to the PEX market. Available in sizes from 3/8 in. to 2 in.
- Factory assembled fittings reduce installation errors on the job site
- Viega smart connect technology for PureFlow press polymer helps identify unpressed connections
- Available in 2 materials, proprietary zero lead bronze and high-performance polymer
- System matched tools provide a consistent connection every time
- NSF 14 and NSF61-G approved for potable water systems and suitable for radiant heating systems
- Press connection, compression
Make your repair with the BrassCraft Replacement Oval Handle for Multi-Turn Water Stop. For use with BrassCraft multi-turn angle or straight water shut-off valves. The Chrome finish will complement most decor.
- Zinc die-cast
- Replacement oval handle for BrassCraft multi-turn water stop in chrome
- For use with BrassCraft multi-turn angle or straight water shut-off valves
- Genuine BrassCraft replacement cross handle for multi-turn water shut-off valve
- Traditional 2 in. oval handle
- Handle Screw is not included
- Easy to install
- For indoor use
- Temperature rating: 40 degree to 150 degree F
This BrassCraft brand 1/4 in. Compression/Push x 1/4 in. Compression/Push Straight Push Fitting, is perfect for your project. With no tools or tube inserts required, it is suitable for both do it yourselfers and pros, alike. Use this product with instrumentation, hydraulic and pneumatic systems. Use it to connect to copper, PEX and other good quality plastic tubing. It is crafted to endure 150 psi at 70 degree F and 60 psi at 140 degree F.
- 1/4 in. compression/push x 1/4 in. compression/push straight push fitting
- Use to connect to copper, PEX and other good quality plastic tubing
- 150 psi at 70 degree F and 60 psi at 140 degree F
- Zero-leak connections
- Use with instrumentation, hydraulic and pneumatic systems
- Easy to use
ProLine 1/2 in. stop and waste valve can handle pressure up to 125 psi and can resist temperatures up to 212°F. The valve is made from durable solid brass. This is a lead-free product.
- Solid brass construction for durability
- Maximum pressure of 125 psi
- Resists temperatures up to 212°F
- 1/2 in. fitting size
- Stop-type valve design
- Lead-free
This Brass Craft brand 3/8 in. Compression/Push x 3/8 in. Compression/Push Straight Push Fitting is perfect for your project. With no tools or tube inserts required, it is suitable for both do it yourselfers and pros, alike. Use this product with instrumentation, hydraulic and pneumatic systems. Use it to connect to copper, PEX and other good quality plastic tubing. It is crafted to endure 150 psi at 70° F and 60 psi at 140°F.
- 3/8 in. compression/push x 3/8 in. compression/push straight
- Easy to use, no tools push to connect
- Durable nylon construction
- 150 psi at 70°F and 60 psi at 140° F
- No lead certified
- Easy to use
The Everbilt Stop Valve is a multi-purpose in-line shutoff valve for use in low-pressure, domestic water systems. This valve is suitable for stopping, controlling and regulating the supply of flow. Constructed of high quality lead-free alloy per ASTM specifications, the lead-free valve is recommended for applications that deliver water for human consumption, including commercial and residential construction.
- Brass construction for durability
- Use as a pressure-regulating valve in piping systems
- Manual actuation
- For use with water, oil and gas
- For commercial and residential use
- 1-year limited warranty
Stop Valves are great multi-purpose in-line valves for residential and commercial uses. ProLine Series Stop Valves are designed to stop or regulate the flow of water running through the valve in low-pressure lines. The screw-on waste cap allows flushing of the un-pressurized line when the valve is closed for maintenance. Operation of this valve is easy due to it's multi-turn handle and is built with a brass body for durability and long operational life.
- 125 PSI WOG
- Rising stem for positive open and close operation
- Six-point cast-iron handle
- Plug allows draining of non-pressure side of valve when closed
- Stop-type valve design
- Lead-free
The ProLine 1/2 in. x 1/2 in. solid brass C x C stop and waste valve is perfect for your next plumbing project. It can handle pressure up to 125 psi and can resist temperatures up to 212 degree F. The brass construction makes this valve durable and long lasting.
- Solid brass construction for durability
- Maximum pressure of 125 psi
- Resists temperatures up to 212 degree F
- 1/2 in. fitting size
- Stop-type valve design
- Lead-free
Stop Valves are great multi-purpose in-line valves for residential and commercial uses. ProLine Series Stop Valves are designed to stop or regulate the flow of water running through the valve in low-pressure lines. The screw-on waste cap allows flushing of the non-pressurized line when the valve is closed for maintenance. Operation of this valve is easy due to it's multi-turn handle.
- 125 PSI WOG
- Designed to allow for flow control in the plumbing line
- Rising stem for positive open and close operation
- For use with hot or cold water or oil
- Manual actuation
- Lead-free
- Long life and reliable performance
Stop Valves are great multi-purpose in-line valves for residential and commercial uses. ProLine Series Stop Valves are designed to stop or regulate the flow of water running through the valve in low-pressure lines. Operation of this valve is easy due to it's multi-turn handle and is built with a brass body for durability and long operational life.
- 125 PSI WOG
- Designed to allow for flow control in the plumbing line
- Rising stem for positive open and close operation
- For use with hot or cold water or oil
- Meets NSF-approved low-lead standards
- Long life and reliable performance
Everbilt Evaporative Cooler Valve performs a vital function in your evaporative cooler. The valve fits directly onto existing outdoor faucet. Attach angle needle valve or male compression coupling to side tapped 1/8 in. FIP to connect to cooler.
- Heavy cast iron handle
- 3/4 in. hose thread inlet and outlet
- 1/8 in. FIP thread side tap for connection to air conditioner
- Neoprene seal disc
- 125 psi maximum pressure
- 1-year limited warranty
The product is high quality and reliability and durability. The product is easing to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
- Wide selection
- Easy to install
The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Angle Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pin. clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
- Most economical piping system available
- Quarter-turn handle design for simple flow control
- Compatible with PEX pipe
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
- NSF Listed
- Barb x compression connection for PEX plumbing systems
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F
The ApolloPEX 1/2 in. Chrome-Plated Brass PEX Barb x 3/8 in. Compression Quarter-Turn Straight Stop Valve is simple to install and provides flow control through a quarter-turn ball valve. Most commonly used at point of use fixtures, it allows for repair and maintenance of fixtures without the need to shut down flow control to the entire system. The 3/8 in. compression outlet provides the capability to install 3/8 in. O.D. tubing or 3/8 in. supply lines. It is designed for use on point of use fixtures such as dishwashers, toilets and faucets. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pin. clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Constructed of chrome-plated lead free dezincification resistant (DZR) brass for superior reliability and strength
- Most economical piping system available
- Quarter-turn handle design for simple flow control
- Compatible with PEX pipe
- Meets UPC, IPC and cUPC standard
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
- NSF Listed
- Barb x compression connection for PEX plumbing systems
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F