Searched for "40141607"

Sharkbite 1/2" Pushtoconnect Coupling. Mfg #UR008

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

The PVC Sch. 40 Ball Valves are used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations.

• PVC Sch. 40 construction
• Compatible with PVC piping (not included)
• FPT x FPT connections
• Add a shut off valve to your sprinkler system, irrigation system or pool
• Maximum pressure of 150 psi at 73 degree F
• Manually operated

This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.

• Lead free design is suitable for all potable water supply installations
• Quarter-turn operation
• Features a full port brass ball that maximizes flow and minimizes pressure drop
• Lead free forged brass body
• Use of pipe thread sealant or thread tape is recommended for installation
• ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 3/4 in. Pipe Insertion Depth = 1-1/8 in.

Sharkbite Max Ball Valve 3/4" Model UR22185. Mfg #UR22185

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability

This lead free ball valve is forged from bass and includes a lever handle with female connections on both ends. Perfect for residential and commercial use on water, air, steam, oil and gas applications. Designed for minimum pressure drops. Each valve is corrosion resistant.

• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• Suitable for non-shock operating pressures up to 600 psi
• Threaded end connections conform to ANSI/ASME B1.20.1
• ANSI/ASMEB16.33 for use with natural, manufactured, mixed and liquefied petroleum gases or propane gas and LP gas-air mixtures
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position

Sharkbite Max Ball Valve 1/2" Model UR22222. Mfg #UR22222

• Can Be Installed On Wet Lines And Pressure Tested Immediately
• Stainless steel retainer adds strength and durability

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The ApolloPEX 3/4 in. Brass PEX Barb Ball Valve is simple to install and provides flow control through an anti-stick and smooth operating quarter turn lever handle. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX valves can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Most economical piping system available
• Quarter-turn lever handle design for simple flow control
• Compatible with PEX pipe
• Meets UPC, IPC and cUPC standard
• Can be secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
• NSF listed
• Barb x barb connection for PEX plumbing systems
• Rated to 200 degree F and 200 psi

The 3/4 in. CPVC Slip x Slip Ball Valve is designed for use with hot and cold water. The Ball Valve features CPVC construction and is compatible with CPVC tubing-sized pipes (pipes not included). The valve has a maximum working pressure of 100 psi at 180 degree F and is not meant for use with compressed air.

• CPVC construction
• Compatible with CPVC pipes (sold separately)
• 125 psi maximum pressure
• Working temperature from 40 degree F to 150 degree F
• Suitable for all potable water supply installations
• Beige color

The 3/4 in. Tectite by Apollo Push-To-Connect ball valve is the fastest, cleanest and simplest way to install or replace a ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open flame or glue. The quarter turn, single lever control allows for simple control of water flow in hydronic and potable water systems. Simply insert the pipe to allow the high-strength stainless steel teeth to grip the pipe securely against the specially designed O-ring. Fitting removal and reuse is just as simple using a simple demount clip (sold separately). After assembly, valves may be rotated for simpler installation in tight spaces.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 60
• Demount clip allows for valve removal (sold separately)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

The Homewerks Worldwide Lead Free Press Ball Valve is constructed of heavy forged brass and has a lever handle with press connections on both ends. Designed for residential and commercial use in no-lead potable water installations, this valve complies with all lead-free plumbing laws. This valve is installed with commercially available VUS profile crimp tools (available for purchase or rental). The double O-ring press crimp connections have pressure ratings that far exceed comparable push to connect valves. This valve also has excellent corrosion resistance and is fit for many potable water applications.

• Lead-free construction is suitable for all no-lead potable water applications, in full compliance with all lead-free plumbing standards
• Full port, quarter turn design provides a reliable shut off without slowing flow through the pipe
• Designed for installation onto type K, L or M rigid copper pipe
• Both steel handle and nut covered with an anti-corrosion treatment
• Compatible with commercially-available VUS profile crimp tools
• Double O-Ring press connection create a reliable seal that will work under higher pressures than push to connect or PEX systems
• Crimp tool installation means less materials used during install - no solder, crimp rings or solvents required

The 3/4 in. Tectite by Apollo Push-To-Connect Slip Ball Valve is an innovation designed to make a quick repairs or add flow control through a ball valve to rigid Copper or CPVC Pipe. The slip capability allows a section (up to 2 in.) of pipe to be cut out allowing for the easy installation of the ball valve where rigid pipes do not allow movement. Simply insert the slip coupling on to the pipe and using the Tectite by Apollo demount clip (included) to slip the fitting back onto the other end of pipe completing the connection. Great for emergencies and freeze repairs, the Tectite by Apollo Push-To-Connect slip ball valve is the fastest, cleanest and simplest way to add flow control to copper or CPVC pipe without the use of tools, solder, open flame or glue. Fitting removal and reuse is just as simple using a simple demount clip (included). After assembly, valves may be rotated for simpler installation in tight spaces. All Tectite by Apollo fittings are approved for use in both potable water and hydronic heating piping systems.

• Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength
• Push-to-connect joints require no heat, solder, solvents or tools
• Push-to-connect design allows for a simple and fast installation on any combination of copper, PEX, CPVC or PE-RT pipe
• Fittings can be rotated after being installed for ease of use in tight spaces
• Ideal for potable water and hydronic heating applications
• Quarter turn lever handle for simple flow control
• Meets UPC, IPC and cUPC standard requirements and listed by IAPMO and listed to ASSE 1061/NSF 58
• Demount clip allows for valve removal (included)
• Approved for behind-the-wall with no access and burial
• Corrosion resistant for greater longevity
• Maximum working pressure of 200 psi and maximum temperature of 250 degree F

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1/2 in. pipe insertion depth 15/16 in.

SharkBite Max CONNECTOR 1/2" X 1/2" MNPT. Mfg #UR120

• Doesn't Require Special Tools, Crimping, Glue Or Soldering.

The Everbilt Lead Free Ball Valve with Drain is constructed of heavy forged brass and has a lever handle with Solder Connections on both ends. Designed for residential and commercial use on water air, steam, oil or gas. Full port for maximum flow and minimum pressure drops. This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.

• Forged brass construction
• Lead free design is suitable for all potable water supply installations
• Easy quarter-turn operation
• Suitable for oil, water and gas
• Side tap allows non-pressure side to be drained when valve is in the closed position
• Max pressure 600 psi

The Homewerks Worldwide Lead Free Press Ball Valve is constructed of heavy forged brass and has a lever handle with press connections on both ends. Designed for residential and commercial use in no-lead potable water installations, this valve complies with all lead-free plumbing laws. This valve is installed with commercially available VUS profile crimp tools (available for purchase or rental). The double O-ring press crimp connections have pressure ratings that far exceed comparable push to connect valves. This valve also has excellent corrosion resistance and is fit for many potable water applications.

• Lead-free construction is suitable for all no-lead potable water applications, in full compliance with all lead-free plumbing standards
• Full port, quarter turn design provides a reliable shut off without slowing flow through the pipe
• Designed for installation onto type K, L or M rigid copper pipe
• Both steel handle and nut covered with an anti-corrosion treatment
• Compatible with commercially-available VUS profile crimp tools
• Double O-Ring press connection create a reliable seal that will work under higher pressures than push to connect or PEX systems
• Crimp tool installation means less materials used during install - no solder, crimp rings or solvents required

SharkBite Push-to-connect ball valve is the easiest way to install a new or replacement shut-off ball valve. The single lever quarter-turn control allows for easy operation and the valve is perfect for potable water and hydronic applications where a shut-off is needed. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the valve after installation. Removing the valve is just as fast using a disconnect tool so the valve can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.

• Compatible with PEX, copper, CPVC, PE-RT, and HDPE pipe
• Push-to-connect fittings are ideal for installation in tight spaces
• Rated to 200 degrees Fahrenheit and 200 PSI
• Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
• Can be installed on wet or dry lines and pressure tested immediately, no waiting on soldered joints to cool or solvents to dry
• Low-lead DZR corrosion-resistant brass body
• Code approved, IAPMO listed, for details see Specifications
• 25-Year warranty when used with PEX, copper, CPVC & PE-RT pipe
• 5-Year warranty when used with SDR-9 HDPE pipe
• Meets all UPC, IPC and cUPC requirements
• Demount clip allows user to release the fitting from the pipe for convenient installation flexibility (sold separately)
• Rated to 200 degree F and 200 psi
• 1 in. Pipe Insertion Depth = 1-5/16 in.

Viega ProPress is the trusted copper press joining solution. Since its introduction in 1999, it has reduced overall job costs, saved time and increased reliability on jobsites across the globe. Viega is the only company with Smart Connect, a technology that helps installers easily identify an unpressed fitting, providing them with added confidence in their connections. With system-matched tools and jaws, press connections are made in seconds, making Viega ProPress suitable for virtually any type of project.

• Viega Smart Connect makes secure connection in less than 7 seconds
• Minimizes system downtime by allowing for wet connection
• Fast and easy to use
• No flame, solder, flux, or heavy equipment needed
• Helps installers easily identify unpressed connections during pressure testing
• Lead free

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372
• Valve pressure rating 600 psi/41.4 in. bar non-shock cold working pressure (3/8 in. to 2 in.)

Designed for residential/commercial air, steam, oil or gas applications, this 3/4 in. Lead Free Brass Sweat x Sweat Ball Valve includes a full port for maximum flow and minimum pressure drops. Each valve has a full forged brass body that provides excellent corrosion resistance. Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position.

• Forged brass body
• Full port
• Quarter-turn operation
• Lead free design is suitable for all potable water supply installations
• Valve not intended to throttle the flow of water, use only in a fully opened or fully closed position
• Made in Italy

The NIBCO lead-free, brass ball valve with solder end connections provides bubble-tight shutoff. The valve's PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications. The NIBCO brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The two-piece valve features solder end connections for easy installation.

• Lead free
• Full port
• Blowout-proof stem
• Standard lever handle
• Female solder cup end connections
• NSF/ANSI-61-8
• NSF/ANSI-372
• UPC-IGC-157

The PVC Sch. 40 Ball Valves are used for cold water pressure distribution systems in residential, commercial, agricultural and light industrial applications. This NSF-approved valve features EPDM seats and O-rings and is constructed from durable PVC material. Ideal for applications where space and weight are critical considerations.

• PVC Sch. 40 construction
• Compatible with PVC piping (not included)
• FPT x FPT connections
• Add a shut off valve to your sprinkler system, irrigation system or pool
• Maximum pressure of 150 psi at 73 degree F
• Manually operated

The NIBCO lead-free brass ball valve provides ease of operation with quarter-turn (90 degree ) open to close. The 2-piece valve features threaded end connections for easy installation. Please refer to NIBCO technical data sheet, valve selection guide and catalog for engineering and installation information. Choose NIBCO ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO specialty valves are backed by a NIBCO INC. 2-year limited warranty.

• 3/4 in. Inside Diameter and 0.875 in. Outside Diameter
• Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4 in. to 2 in.)
• Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2 in. to 4 in.)
• Full port
• Blowout-proof stem
• Threaded end connections
• Standard lever handle
• IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
• CSA ANSI Z21.15/CSA 9.1 (1/4 in. to 4 in.)
• CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
• CSA ASME B16.33: 125 psi (maximum) (1/4 in. to 4 in.)
• CSA CAN/CGA 3.16 (1/4 in. to 4 in. )
• CSA CGA CR91-002: 1/2 psi, 2 psi, and 5 psi (1/4 in. to 4 in.)
• UL 1477 (YQNZ): compressed gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRBX): flammable liquid shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (YRPV): gas shutoff valves - 250 psi (1/4 in. to 4 in.)
• UL 842 (MHKZ): manual valves - 250 psi (1/4 in. to 4 in.)
• UL 125 (YSDT): LP-gas shutoff valves - 250 psi (1/4 in. to 4 in.)