Test Caps & Plugs
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- will not fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Made of plastic
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- will not fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test cap
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- will not fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test-Tite
Test-Tite Techno-Caps Heavy-Duty Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. These heavy-duty end caps are available in a variety of sizes for both ABS and PVC plumbing systems. They feature a sturdy design that can be solvent-welded securely into place, preventing them from falling inside and clogging the pipe. Once installed, the drain test caps effectively test systems with up to 40 feet of water or 17 psig.
- Heavy-duty test cap for DWV (drain, waste, and vent) piping
- Can be solvent-welded into place to either PVC or ABS piping
- Won't fall inside and clog pipe
- Tests up to 40 feet of water or 17 psig
- Available in a variety of sizes
- Test-Tite
Dallas Specialty Dal-Caps clean out or test caps are easy to install. They are durable and reusable. They can be a temporary or permanent Clean-Out cap.
- Clean-Out cap
- Test cap
- temporary cap
- permanent cap
- stainless steel hose clamp
- Flexible cap
Dallas Specialty 2" Dal-Cap is a clean out or test cap. The Dal-Cap is easy to install. Can be used as a permanent or temporary cap.
- Flexible
- Permanent
- temporary
- Reusable
- Clean-Out Cap
- Testing Cap
2 in. cost effective wing nut test plug. Used for plugging open ended pipe. Includes rubber sealing ring.
- Oversized wing nut with wrench pad for easy removal
- Made of high impact ABS material
- Will not rust or corrode
- Sold by the case
- Durable
- ABS
DALLAS SPECIALTY 4 in. clean out or test cap is easy to install. The Dal-Cap can be temporary or permanent. The Dal-Cap is flexible to fit many different types of pipe.
- Flexible
- Permanent
- Temporary
- Reusable
- Clean-out cap
- Testing cap
Dallas Specialty 3" clean out or test cap is easy to install. The Dal-Cap can be temporary or permanent. The Dal-Cap is Flexible to fit many different type of pipe.
- Flexible
- Permanent
- Temporary
- reusable
- Clean-Out cap
- Testing cap
The Test-Tite Twist-Tite ABS Mechanical Test Plug delivers a reliable seal for testing or temporarily blocking standard-sized DWV (drain, waste, and vent) piping. Made of high-impact ABS, this test plug features an oversized wing nut and wrench pad that make installation and removal easy and intuitive. The test plug is designed to sit on the end of the drain pipe with a neoprene gasket to create an airtight seal. The ABS plates, steel-plated screw, and zinc nut are all corrosion resistant, allowing this pipe test plug to be used for multiple jobs.
- ABS mechanical test plug for use with standard-sized DWV (drain, waste, and vent) piping
- Designed to test or temporarily block pipelines (for end-of-pipe use only)
- Oversized wing nut and wrench pad make installation and removal easy and intuitive
- Neoprene gasket creates an airtight seal around the outside of the pipe
- Corrosion-resistant construction (ABS plates, steel-plated screw, and zinc nut)
- ABS
The Test-Tite Twist-Tite ABS Mechanical Test Plug delivers a reliable seal for testing or temporarily blocking standard-sized DWV (drain, waste, and vent) piping. Made of high-impact ABS, this test plug features an oversized wing nut and wrench pad that make installation and removal easy and intuitive. The test plug is designed to sit on the end of the drain pipe with a neoprene gasket to create an airtight seal. The ABS plates, steel-plated screw, and zinc nut are all corrosion resistant, allowing this pipe test plug to be used for multiple jobs.
- ABS mechanical test plug for use with standard-sized DWV (drain, waste, and vent) piping
- Designed to test or temporarily block pipelines (for end-of-pipe use only)
- Oversized wing nut and wrench pad make installation and removal easy and intuitive
- Neoprene gasket creates an airtight seal around the outside of the pipe
- Corrosion-resistant construction (ABS plates, steel-plated screw, and zinc nut)
- ABS
Twist-Tite Mechanical Test Plug. Oversized Wingnut with Wrench Pad for Easy Removal, Made of High Impact ABS Material. Will not rust or Corrode, Neoprene Gasket.
- Mechanical test plug
- Oversized wingnut with wrench pad for easy removal
- Made of high impact abs material
- Will not rust or corrode, neoprene gasket
- Test-Tite
- Very durable
Test-Tite Kap-On Combination Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. Choose from two models: one fits 1-1/2- and 2-inch piping, while the other fits 3- and 4-inch piping. These moderate-pressure test caps can be solvent-welded on either PVC or ABS pipes and are higher rated than plug-on test caps. Once installed, the caps can effectively test systems with up to 30 feet of water or 12 psig.
- Moderate-pressure test cap for DWV (drain, waste, and vent) piping
- Available in two sizes (one fits 1-1/2- and 2-inch piping, while the other fits 3- and 4-inch piping)
- Higher rated than plug-on test caps
- Can be solvent-welded to both PVC and ABS pipes
- Tests up to 30 feet of water or 12 psig
- Test Cap
- Solvent weld
The Test-Tite Combination T-Cone Test Plug offers contractors an efficient and reusable option for testing DWV (drain, waste, and vent) systems. Available in many different sizes and compatible with a variety of piping materials (including Schedule 40 DWV, copper, PVC, cast iron, and more), this economical drain test plug is rustproof and designed for reuse. The rubber gasket creates positive sealing that effectively tests up to 50 feet of head pressure.
- Economical drain test plug for DWV (drain, waste, and vent) systems
- Creates positive sealing that effectively tests up to 50 feet of head pressure
- Rustproof and reusable
- Available in many different sizes and compatible with a variety of piping materials
- Some models feature a flush-mount recessed design
- Corrosion resistant
Cleanout Test Plug for General use, 3 in. For Pressure Testing Plumbing Systems and General Plugging Applications, eliminates test water back splash. Can Be Used with Any Type Of Pipe.
- Designed for the testing of plumbing pipelines above the cleanout tee
- Design of this plug will allow for passing of the test water or air by deflating the plug
- After deflation, the plug can be unscrewed from the test tee
- Manufactured from a durable natural rubber compound
- Durable
- Cleanout test plug
The Test-Tite Combination T-Cone Test Plug offers contractors an efficient and reusable option for testing DWV (drain, waste, and vent) systems. Available in many different sizes and compatible with a variety of piping materials (including Schedule 40 DWV, copper, PVC, cast iron, and more), this economical drain test plug is rustproof and designed for reuse. The rubber gasket creates positive sealing that effectively tests up to 50 feet of head pressure.
- Economical drain test plug for DWV (drain, waste, and vent) systems
- Creates positive sealing that effectively tests up to 50 feet of head pressure
- Rustproof and reusable
- Available in many different sizes and compatible with a variety of piping materials
- Some models feature a flush-mount recessed design
- Corrosion resistant
The Test-Tite Combination T-Cone Test Plug offers contractors an efficient and reusable option for testing DWV (drain, waste, and vent) systems. Available in many different sizes and compatible with a variety of piping materials (including Schedule 40 DWV, copper, PVC, cast iron, and more), this economical drain test plug is rustproof and designed for reuse. The rubber gasket creates positive sealing that effectively tests up to 50 feet of head pressure.
- Economical drain test plug for DWV (drain, waste, and vent) systems
- Creates positive sealing that effectively tests up to 50 feet of head pressure
- Rustproof and reusable
- Available in many different sizes and compatible with a variety of piping materials
- Some models feature a flush-mount recessed design
- Corrosion resistant
Test-Tite Plug-On Test Caps are an effective and economical solution for testing DWV (drain, waste, and vent) systems. Available in sizes to fit 1-1-/2-inch, 2-inch, 3-inch, and 4-inch piping, these low-pressure test-caps can be solvent-welded to both PVC and ABS pipe. Once installed, the drain test caps effectively test systems with up to 10 feet of water or 4.3 psig.
- Low-pressure test cap for DWV (drain, waste, and vent) piping
- An efficient and economical solution for testing DWV systems
- Can be solvent-welded to both PVC and ABS piping
- Tests up to 10 feet of water or 4.3 psig
- Available in sizes to fit 1-1-/2-inch, 2-inch, 3-inch, and 4-inch piping
- Removable
Cleanout Test Plug for General use, 2 in. For Pressure Testing Plumbing Systems and General Plugging Applications, eliminates test water back splash. Can Be Used with Any Type Of Pipe.
- Designed for the testing of plumbing pipelines above the cleanout tee
- Design of this plug will allow for passing of the test water or air by deflating the plug
- After deflation, the plug can be unscrewed from the test tee
- Manufactured from a durable natural rubber compound
- Test-Tite
- Very durable
4 in. Standard Pneumatic Test Plug is designed for the testing of pipelines or to temporarily stop the flow. Can be used in a variety of fitting applications and are suitable for most pipe materials. Conforms to irregular pipe shapes to seal effectively.
- Manufactured from a durable natural rubber
- Suitable for most pipe materials
- Metal cap/core tool is also included
- Sold by the case
- Durable
- 4 in.
2 in. Standard Pneumatic Test Plug is designed for the testing of pipelines or to temporarily stop the flow. Can be used in a variety of fitting applications and are suitable for most pipe materials. Conforms to irregular pipe shapes to seal effectively.
- Manufactured from a durable natural rubber
- Suitable for most pipe materials
- Metal cap/core tool is also included
- Sold by the case
- Durable
- 2 in.
HIPS Material. Size: 4 in. Knock-out Plug. Round.
- Hips material
- Size:4 in.
- Knock-out plug
- Round
- Closet flange
- DWV
Test Plug Standard 1 1/2 in. For Pressure Testing Plumbing Systems and General Plugging Applications. Can Be Used with Any Type Of Pipe.
- Designed for testing or to temporarily stop the flow
- Conforms to irregular pipe shapes to seal effectively
- Manufactured from a durable natural rubber
- Metal cap/core tool is also included
- Durable
- Test plug
3 in. Standard Pneumatic Test Plug is designed for the testing of pipelines or to temporarily stop the flow. Can be used in a variety of fitting applications and are suitable for most pipe materials. Conforms to irregular pipe shapes to seal effectively.
- Manufactured from a durable natural rubber
- Suitable for most pipe materials
- Metal cap/core tool is also included
- Sold by the case
- 3 in.
- Durable