Pvc Tees
Center Outlet. 1-1/2 in. PP Material.
- Plastic
- Slip joint
- Size with 1-1/2 in.
- With tailpiece
- White
- cUPC approval
Sewer and Drain 4 in. bull nose tee. Used primarily in seepage bed piping grids in conjunction with perforated pipe. Used where flow characteristics are not a primary consideration.
- Used in sewer seepage systems
- Used with sewer lines
- Used with perimeter drains
- Light weight, easy to install
- Solvent weld
- Rated for under ground use
PVC Sch. 40 fitting that is for pressure systems where temperatures will not exceed 140 degree F. They are highly resilient, with high-tensile and high-impact strength. PVC Sch. 40 has better sound deadening qualities than PVC Sch. 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement.
- White pipe and fittings with red print
- Intended for pressure use
- For use where systems will not exceed 140° F
- PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
- Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
- Require no special tools for cutting and to be installed with solvent cement
- +/-0.623" ID and 0.84" OD
- +/-0.623" ID and 0.84" OD
The schedule 80 PVC tee fitting has socket openings on each end, and is suitable for connecting and branching three pipes. The socket ends connect to pipes with a smooth bore for enhanced flow. The fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.
- Tee fitting with three openings for connecting and branching three pipes
- Socket openings on each end for connecting three male pipes
- PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
- Operating temperature range of 0 to 60 degrees C (32 to 140 degrees F)
- Meets ASTM D1784 and D1785 standards for quality assurance, and meets NSF standards 14 and 61 for potable water service
- Made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance,
Suitable for use in cold water systems with pressure up to 600 psi. The MUELLER STREAMLINE 1/2 in. PVC Slip x Slip x FIPT Tee connects a main line to a branch line. Use for cold water pressure systems, such as with plant and flower beds, gardens, swimming pools and spas.
- Sch. 40 PVC requires the use of a primer before cementing
- Joins a female threaded branch line to a Sch. 40 main line
- Use for cold water pressure systems, such as with plant and flower beds, gardens, swimming pools and spas
- Compatible with PVC pipe
- Slip x slip x FIPT solvent-weld and threaded connection
- Maximum working pressure of 600 psi
- Made in USA
The MUELLER STREAMLINE 3/4 in. x 3/4 in. x 1/2 in. PVC Slip x Slip x FIPT Reducing Tee withstands pressure up to 480 psi. Designed for use in cold water lines. Use for cold water pressure systems such as with plant and flower beds, gardens, swimming pools and spas.
- Schedule 40 PVC requires the use of a primer before cementing
- Joins a female threaded branch line to a Schedule 40 main line
- Use for cold water pressure systems such as with plant and flower beds, gardens, swimming pools and spas
- Compatible with PVC pipe
- Slip x slip x FIPT solvent-weld and threaded connection
- Maximum working pressure of 480 psi
- Made in USA
PVC Sch. 40 fitting that is for pressure systems where temperatures will not exceed 140 degree F. They are highly resilient, with high-tensile and high-impact strength. PVC Sch. 40 has better sound deadening qualities than PVC Sch. 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement.
- White pipe and fittings with red print
- Intended for pressure use
- For use where systems will not exceed 140° F
- PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
- Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
- Require no special tools for cutting and to be installed with solvent cement
- +/-0.623" ID and 0.84" OD
- +/-0.623" ID and 0.84" OD
The schedule 80 PVC tee fitting has socket openings on each end, and is suitable for connecting and branching three pipes. The socket ends connect to pipes with a smooth bore for enhanced flow. The fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.
- Tee fitting with three openings for connecting and branching three pipes
- Socket openings on each end for connecting three male pipes
- PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
- Operating temperature range of 0 to 60 degrees C (32 to 140 degrees F)
- Meets ASTM D1784 and D1785 standards for quality assurance, and meets NSF standards 14 and 61 for potable water service
- Made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance,
The schedule 80 PVC tee fitting has socket openings on each end, and is suitable for connecting and branching three pipes. The socket ends connect to pipes with a smooth bore for enhanced flow. The fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee.
- Tee fitting with three openings for connecting and branching three pipes
- Socket openings on each end for connecting three male pipes
- PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
- Operating temperature range of 0 to 60 degrees C (32 to 140 degrees F)
- Meets ASTM D1784 and D1785 standards for quality assurance, and meets NSF standards 14 and 61 for potable water service
- Made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance,
The Mueller Streamline 1 in. x 1 in. x 1/2 in. PVC Slip x Slip x FIPT Reducing Tee is designed to connect a branch line to a main line in cold water pressure applications such as irrigation.
- Schedule 40 PVC requires the use of a primer before cementing
- Provides a branch line from a Schedule 40 main line
- Compatible with PVC pipe
- Use for cold water pressure systems such as with plant and flower beds, gardens, swimming pools and spas
- Slip x slip x FIPT solvent-weld and threaded connection
- Maximum working pressure of 450 psi
PVC Sch. 40 fitting that is for pressure systems where temperatures will not exceed 140F. They are highly resilient, with high-tensile and high-impact strength. PVC Sch. 40 has better sound deadening qualities than PVC Sch. 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement.
- White pipe and fittings with red print
- Intended for pressure use
- For use where systems will not exceed 140° F
- PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
- Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
- Require no special tools for cutting and to be installed with solvent cement
- +/-1.049" ID and 1.315" OD
- +/-1.049" ID and 1.315" OD