Condensing Unit Pads & Covers

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

The latest generation in vibration dampening technology and the most effective vibration dampening pad available on the market. The EVA Pad was tested against other pads at four different vibration settings and in the most severe vibration extremes, the EVA Pad outperforms cork and rubber by a margin of greater than 3:1. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Superior performance is due to the special composite foam center which is much more structurally sound than cork
• It is not affected by oils or chemicals that can break down cork and is much more effective at vibration dampening than solid rubber
• Most effective vibration dampening pad available on the market
• EVA pad outperforms cork and rubber by a margin of greater than 3:1
• Designed to withstand 50 psi

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• Diversitechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.

• Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
• Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
• Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
• Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
• Textured surface prevents equipment sliding
• UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
• Water vapor evaporates through the UltraLite, preventing the expansion of cracks
• UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
• Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation

Generous individually engineered ribbing for optimum self-leveling ground support. Founded in 1971, Diversitech Corporation is North Americas largest manufacturer of equipment pads and a leading manufacturer and supplier of components and related products for multiple industries, including: HVACR, electrical, consumer hardware retail, electrical utility, automotive retail and pool and spa channel. Diversitechs mission for its wholesaler partners is to simplify their work. We do this by offering more than 200 product categories all from a single manufacturing/supplier source to create product availability and supply chain cost advantages for our customers in every market we serve. We also leverage best-in-class customer service to react quickly and professionally to every customer request.

• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• Diversitechs most popular pad due to its rugged durability, strength, and clean looks

Designed specifically for the hurricane prone regions of Florida and the Gulf Coast, The Hurricane Pad meets stringent local code requirements for wind resistance. Heavier than a normal concrete pad, this 4 pad provides sufficient weight to meet code. For certain taller equipment, The Hurricane T-Class Pad is needed.

• Bracket secures condenser to the Hurricane Pad
• Use #8 self-drilling or self-tapping screws to secure condenser to brackets
• Be sure to place brackets according to local building code requirements
• Easy to install

EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.

• Lower cost version of E-Lite pad
• Lightweight, durable, and exceptionally strong
• Textured top surface to reduce slippage
• Unaffected by UV exposure or extreme weather
• Drillable for securing unit (1/4 in. x 1-1/4 in. Tapcon recommended)

Since UltraLite is a lightweight product, it is easy for handling tasks on site. It is one of the lightest equipment mounting products available today. Where local codes supersede the International code and require a pad thicker than 2 3 UltraLite is the solution.

• Ultralite pad performs extraordinarily well under strict testing criteria, it does not craze, soften, or delaminate
• Ultralite has a proven resistance against R-22 and R-134a, compressor oil, salt solution, and synthetic canine urine
• Engineered polystyrene core in the UltraLite lightweight concrete pad absorbs and dampens vibration associated with normal operation of a condensing unit
• Ultralite lightweight concrete pad is specifically engineered to have long-term exterior weather resistance
• Textured surface prevents equipment sliding
• UltraLite lightweight concrete pad literally installs in seconds while providing a solid foundation for the condensing unit
• Water vapor evaporates through the UltraLite, preventing the expansion of cracks
• UltraLite is resistant to heating caused by the compressor; additionally, the surface is resistant to heat from incidental torch flame during site installation
• Since the UltraLite is designed for life outdoors, it is suitable for outside storage prior to the site installation

EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.

• Lower cost version of E-Lite pad
• Lightweight, durable, and exceptionally strong
• Textured top surface to reduce slippage
• Unaffected by UV exposure or extreme weather
• Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)

EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.

• Lower cost version of E-Lite pad
• Lightweight, durable, and exceptionally strong
• Textured top surface to reduce slippage
• Unaffected by UV exposure or extreme weather
• Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.

• Lower cost version of E-Lite pad
• Lightweight, durable, and exceptionally strong
• Textured top surface to reduce slippage
• Unaffected by UV exposure or extreme weather
• Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)

Designed specifically for the hurricane prone regions of Florida and the Gulf Coast, The Hurricane Pad meets stringent local code requirements for wind resistance. Heavier than a normal concrete pad, this 4 pad provides sufficient weight to meet code. For certain taller equipment, The Hurricane T-Class Pad is needed.

• Hurricane pad MD is composed of at least 15% recycled material, making it environmentally friendly
• Hurricane Pad MD is made from a minimum 7000 psi solid concrete to meet the strict requirements of Miami-Dade (FL) county; no other pad can match the compressive strength of the Hurricane Pad MD
• Hurricane Pad MD does not absorb water like some other pads which maintains the structural integrity of the pad and keeps it in place to protect the equipment
• Hurricane Pad MD is made from 100% solid concrete with no EPS foam pad, the solid concrete construction ensures this pad stays in place even in winds up to 150 mph
• Hurricane Pad MD has anchor pullout strength of 1140 lbs. which means the pad will hold onto mounted equipment even in extreme conditions
• Hurricane Pad includes steel reinforcement to add strength and stability to the pad
• Hurricane Pad will not float like some other pads and stays in place even during extreme rainfall or flooding
• Hurricane Pad uses standard Tapcon screws and does not need special inserts to securely attach to the equipment

EcoPad is a polypropylene plastic mounting pad designed to support HVAC outdoor units and other outdoor equipment. These pads are a great environmentally friendly alternative to concrete equipment pads, thanks to the recycled content and low raw material usage when formed. The rugged design and optimized rib-pattern provide excellent support on soil and gravel terrain. Available in both 2 in. and 3 in., depending on local building code requirements.

• Lower cost version of E-Lite pad
• Lightweight, durable, and exceptionally strong
• Textured top surface to reduce slippage
• Unaffected by UV exposure or extreme weather
• Drillable for securing unit (1/4 in. x 1-1/4 in. tapcon recommended)

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks

E Lite is a plastic pad designed as a mounting base for condenser equipment. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but durable. A subtle texture prevents unit slide and presents a classic appearance which is enhanced by rounded edges.

• Generous individually engineered ribbing for optimum self-leveling ground support
• Each pad is molded with its size in raised letters for easy identification
• Rugged design provides uniform and generous ribbing for optimum self-leveling ground support without inserts
• E Lite is drillable for securing unit
• Does not crack, flake, or warp when tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution (of 20% by volume)
• Flawless performance under the 25-cycle regime specified by ASTM C67
• DiversiTechs most popular pad due to its rugged durability, strength, and clean looks