Hvac Cleaning & Maintenance
Nu-Brite is a non-acid, alkaline-based product for cleaning and brightening air cooled condensers. It is formulated with the best available foaming detergents and chelants to quickly penetrate and dissolve greasy dirt and grime and foam it right out of the coil. The safer alternative to acids.
- Cuts through grease and grime better than acids
- High foaming chemistry to lift dirt out of coil
- Brightens the condenser coils extremely well
- Available in traditional and concentrate formulas
Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. Ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions.
- Industry standard for flushing refrigeration and air conditioning systems
- Ideal for system clean-up after burnouts
- Cleaning is fast, efficient and verifiable
- Flush line sets for R-410A conversions
Evaporator Foam "no rinse" is a high performance, heavy duty detergent, specifically formulated with special surfactants and alkaline cleaners that have been developed into a foaming, no-rinse product. The aerosol product can be sprayed either right side up or upside down. It is ideal for use on most coils, but particularly suited for cooling or evaporator coils.
- Cleans and deodorizes
- Self-rinsing, fast-breaking foam
- Pleasant lemon scent
- Ideal for kitchen applications
The EasySeal line has proven to be the number one trusted leak sealant brand for years, with millions of leaks sealed. Now Nu-Calgon has made EasySeal even better with EASYSEAL ULTIMATE - the strongest and fastest leak sealant on the market, now with the ability to treat systems up to 10-Ton in one application. Now with even brighter UV dye.
- Easiest to install direct inject
- Works with all refrigerants
- Rapid Fusion technology for a stronger bond
- New brighter UV dye
A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, using less sealant than those sealants designed to mix and travel with the system's oil. Designed for large systems up to 5 tons.
- Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
- Eliminates expensive leak search and repair
- Travels with refrigerant to find leaks fast
- Utilizes a reusable hose
Drain Solve is an alkaline-based drain opener which removes grease, hair, vegetable and other organic matter. It is non-fuming and it will clean and clear drains quickly. Simply pour it down the drain and let it work without fear of noxious fumes or reactions that may squirt corrosive chemicals into face and eyes. This product is NSF registered.
- Perfect for clogged A/C condensate lines as well as kitchen, bathtub and lavatory drains
- Pours through standing water
- Cuts through grease and organic matter
- Non-fuming (no rotten egg odor)
Piercing valve and hose for use with A/C EasySeal (item #298768) and A/C EasyDry products. Tool helps in preventing and sealing refrigerant leaks. Pierces top of can and provides hose for easy installation.
- Piercing valve and hose
- Opens EasySeal can easily
- Controls pressure from can
- Included in 2 plus 1 display pack
Foam-Brite's foaming power is incredible. It is a non-acidic, alkaline-based cleaner and brightener containing the best available biodegradable ingredients and a unique chelant/surfactant package to quickly penetrate and remove greasy soils and oxidation. Its high foaming formula helps lift greasy soils out of the coil, leaving finned coils clean and bright. It can be used to replace the more dangerous HF acid-based products for condenser coil cleaning because Foam-Brite does not contain any acids.
- Provides more foam than any condenser coil cleaner in the market
- Ultimate cleaning and brightening while it foams
- Use it in place of the more dangerous HF acid-based products
- Alkaline-based cleaner and brightener
Rx11-flush is a unique solvent that has been engineered for flushing refrigeration and air conditioning systems. Its patented HFC based solvent formulation is powerful enough to flush away sludge, carbon residue, oils, acids, water and other particulate. Ideal for system flushing after burnouts, retrofits and for flushing line sets for R-410A conversions.
- Industry standard for flushing refrigeration and air conditioning systems
- Ideal for system clean-up after burnouts
- Cleaning is fast, efficient and verifiable
- Flush line sets for R-410A conversions
Cal-Shield is a synergistic liquid formulation surface protector. It is specifically designed for application on air-cooled condensers, evaporator coils and other finned heating and cooling coils where it forms a micro-thin or molecular film coating. Once applied, Cal-Shield will protect the coil from adverse conditions within the operating environment.
- Extends life of coils
- Made with FDA approved ingredients
- Ready to use formulation
- Coats and protects
- Extends life of coils in corrosive environments
A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints Easily injected into the system, traveling with the refrigerant, using less sealant than those sealants designed to mix and travel with the systems oil A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal With A/C EasySeal, the contractor is able to just add a can to the system and move on to the next job In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons For systems 1.5 tons to fractional, use A/C EasySeal-SS For commercial systems with refrigerant charge of 125 lbs. - 250 lbs., use A/C EasySeal-XL Must be purchased in case quantity.
- Permanently seals even larger leaks
- Rapid fusion technology for a stronger bond
- Easiest to install direct inject
- Works with all refrigerants
A/C Re-New, formerly Zerol Ice, has been used successfully for many years to improve the performance of air conditioning and refrigeration systems. A/C Re-New provides significant saving in energy use. It also quiets noisy systems and extends the life of the system. It is a lubricant that blends with the system's oil, lasting for the life of the equipment or until the oil is changed.
- Quiets noisy compressors
- Reduces energy consumption, lowers starting and running amps
- OEM approved, frees sticking thermostatic expansion valves and reversing valves
- Aids in oil return with existing oil in R-22 retrofits
Liquid Ice Machine Cleaner is a 75% phosphoric acid of the highest food-grade quality. It is fast acting yet very safe to use and it does not give off any harsh fumes. Because of its 75% phosphoric acid content, it is the most concentrated ice machine cleaner in the market. It has a specific gravity of 1.63 and weighs 13.6 lbs. per gallon. Usage rate is 8 fluid ounces with three gallons of water.
- Formulated for use in all makes and models of ice makers
- Functional in cubes, flakers, drum and tube machines
- Food-grade, USDA-accepted
- Fast acting yet very safe to use
Nickel-Safe Ice Machine Cleaner is a specially formulated citric/phosphoric food-grade product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. It is acceptable for use in machines made by Manitowoc and other manufacturers using nickel. In fact, it was the industry's first nickel-safe product, introduced in collaboration with Manitowoc. Usage rate should be in accordance with the manufacturer's instructions or 16 fl. oz. with 3 Gal. of system water.
- Formulated for use in all makes and models of ice makers including those with nickel and tin plated evaporators
- Functional in cubes, flakers, drum and tube machines
- Food-grade, USDA-accepted
- For ice makers having nickel-plated or tin-plated evaporators
IMS-III is an economical sanitizer that eliminates odors and slime build-up in all ice machines. This product is a sanitizer designed for general use in ice machines. It can also be used in ice cream dispensing equipment and other food dispensing equipment.
- Controls slime build-up on all hard surface areas
- Controls mold and mildew formation
- Eliminates odor
- EPA registered