Electrical Box Covers
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slots compensate up to 12 degree for box misalignment
- Flat, blank
- Made from zinc, pre-coated, steel
- cULus
Used to close an outlet box. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- Flat, 1/2 in. center knockout
- Made of 0.0625 pre-galvanized steel
- cULus Listed
Ceiling Box Cover used to cover unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. It has a deep cover that works with pan boxes without the need to cut the post. It is an attractive cover and the screws don't show on the ceiling.
- Bracket has 2 separate cover mounting options, threaded post pushes in for flat ceilings or screws on for textured/uneven ceilings
- Use #8 screws provided or back out existing screws to accept notched bracket
- Plastic eliminates the scratches you get with painted metal covers
- Covers poorly cut drywall
- Non-rusting, paintable plastic
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Manufactured from durable pre-galvanized steel. UL and CSA Listed. Captive device screws.
- Cover made from zinc, pre-coated, steel
- Houses duplex receptacle
- Cover includes captive mounting screws
- Meets UL and CSA compliance
Manufactured from durable pre-galvanized steel. Designed to cover and protect electrical wiring, switches and receptacles. cULus Listed. Captive device screws provided.
- Made from zinc, pre-coated, steel
- Toggle switch
- Captive mounting screws included
- cULus Listed
Used to support switches or receptacles. UL and CSA listed. Captive device screws included.
- Cover made from zinc, pre-coated, steel
- Blank cover
- Captive mounting screws
- Meets UL and CSA compliance
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- UL Listed, CSA
- 3.5 cu. in. capacity
Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL Listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Durable pregalvanized steel construction
- Mounting slot allows for installation of cover without removing the box screws
- m
Used for mounting switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 5/8 in. raised
- UL Listed, CSA
- 4.5 cu. in. capacity
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions designed to make installation efficient.
- Key-hole allows for installation of cover without removing the box screws
- Blank cover
- Flat
- cULus Listed
Manufactured from durable pre-galvanized steel, and are designed to house and protect electrical wiring, switches, and receptacles. All steel covers are UL and CSA Listed. All covers have captive device screws.
- Made from zinc, pre-coated, steel
- Used to mount devices
- 15.3 cu. in. capacity
- cULus Listed
Manufactured from durable pre-galvanized steel. Designed to cover and protect electrical wiring, switches and receptacles. UL and CSA Listed. Captive device screws included.
- Made from zinc, pre-coated, steel
- 1/2 in. center KO
- Includes captive mounting screws
- Meets UL and CSA compliance
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Accepts 1-toggle switch
- Meets the requirements of the 2020 NEC Article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Used to mount 2-devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 1/2 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 5.5 cu. in. capacity
Manufactured from durable pre-galvanized steel. Designed to house and protect electrical wiring, switches and receptacles. UL listed. Acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre-tapped to accept device fasteners.
- Key-hole allows for installation of cover without removing the box screws
- Raised 3/4 in.
- 4-gang partition
- UL Listed
Surface covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Used to mount two devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 3/4 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 8.8 cu. in. capacity
Manufactured from durable pre-galvanized steel and designed to house and protect electrical wiring, switches, and receptacles in surface mounted or exposed work applications. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Mounting provisions are designed to make installation efficient.
- Durable pre-galvanized steel construction
- Includes required hardware for mounting the devices
- Duplex and toggle switch adapter plates provide flexibility during cover installation
- 6.5 cu. in. capacity
Surface covers used to support switches or receptacles in areas where the box is surface mounted or poitioned in exposed work applications. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 (A)
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
Surface covers used to support switches or receptacles in areas where the box is surface mounted or poitioned in exposed work applicaations. Exposed work covers are 1/2 in. raised. Complies with 2020 NEC Article 250.146 Amp and cULus Listed.
- Driven screws and break-off lock nuts included
- Meets the requirements of the 2020 NEC article 250.146 Amp
- 6.5 cu. in. capacity
- Hardware installation instructions preprinted on packaging
RACO Surface Covers used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. Exposed work covers are 1/2" raised. Complies with 2020 NEC Article 250.146 (A) and cULus Listed.
- 2-Device with insert options
- Meets the requirements of the 2020 NEC Article 250.146 (A)
- 6.5 cu. In. capacity
- Hardware installation instructions preprinted on packaging
Used to mount two devices, such as switches or receptacles. Made from pre-galvanized steel. Fits 4 in. square electrical boxes.
- Angled mounting slot to compensate for misalignment up to 12
- 5/8 in. raised, drawn
- May use low voltage partition to conduit type boxes to divide power from voice/data
- UL Listed, CSA
- 7.3 cu. in. capacity