Dwv Fittings
Rely on the NIBCO 3 in. x 3 in. x 2 in. PVC DWV 45 degree H x H x H Wye for your PVC sanitary system. This wye leads a branch line to a horizontal drain line. Its hub connections are solvent welded. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- NSF/ANSI standard 14
- UL Listed 94V-0
- NSF U.P certified
Choose the NIBCO 3 in. PVC DWV 45 H x H x H Wye for your PVC sanitary system. This wye reliably joins a branch line and a horizontal drain line. Prime and then solvent weld the hub connections. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140 degree F
Add the NIBCO 4 in. x 4 in. x 3 in. PVC DWV 45 H x H x H Wye to your PVC sanitary system. It leads a branch line into a horizontal drain line. Solvent weld the hub connections.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140F
Install the NIBCO 4 in. PVC DWV 45 degree H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. Prime and then solvent weld the hub connections. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. Certified
Use the NIBCO 4 in. x 4 in. x 2 in. PVC DWV 45 H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. After priming, it is connected with solvent welds. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- NIBCO PVC DWV 45 wye is a used in residential and commercial drain, waste and vent systems
- NSF/ANSI Standard 14
- UL Listed 94V-0
Use the NIBCO 2 in. x 2 in. x 1-1/2 in. PVC DWV 45 H x H x H Wye to join a branch line to a horizontal drain line in a PVC sanitary system. The hub connections must be primed and solvent welded. The NIBCO PVC DWV female adapter is used in residential and commercial drain, waste and vent systems.
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. Certified
Use the NIBCO 3 in. x 3 in. x 1-1/2 in. PVC Hub x Hub x Hub Wye to fit a branch line into a horizontal drain line in a non-pressurized sanitary system. Its hub connections are solvent welded in place. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC requires a primer before cementing
- Connects a branch line into a horizontal PVC drain line
- Solvent-welded connections
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. Certified
The NIBCO PVC DWV 45-degree wye is a used in residential and commercial drain, waste and vent systems. The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
- Maximum service temperature of 140 degree F
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- NSF/ANSI standard 14
- UL Listed 94V-0
Add the NIBCO 6 in. PVC DWV 45 H x H x H Wye to your PVC sanitary system where a branch line must join a horizontal drain line. Prime and then solvent weld the hub connections. PVC DWV is easy to install and is joined by solvent cementing or threading.
- 6 in. Inside Diameter and 6.125 in. Outside Diameter
- PVC requires a primer before cementing
- Connects a PVC branch line to a horizontal PVC drain line
- Solvent-welded connections
- Smooth interior finish for reduced friction and material buildup
- Helps remove waste water and waterborne wastes from plumbing fixtures and appliances
- Do not test or use with compressed air or other gases
- Maximum service temperature 140F
- "6 I.D. and 6.125 O.D."
The NIBCO 3 in. PVC DWV 45 double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC DWV is easy to install and is joined by solvent cementing or threading
- PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
- Helps air circulate in drainage piping
- Solvent weld connections
- Maximum working pressure of 5 psi
- Apply a primer to the PVC before cementing
The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC DWV is easy to install and is joined by solvent cementing or threading
- Maximum service temperature of 140 degree F
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO PVC DWV 45-degree wye is a used in residential and commercial drain, waste and vent systems. The PVC DWV 45-degree wye features a hub x hub x hub connection and allows for a connection to be made in continuous pipeline and branch out to a different direction. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.
- Maximum service temperature of 140 degree F
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO 2 in. PVC DWV 45 double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness.
- PVC DWV is easy to install and is joined by solvent cementing or threading
- PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
- Maximum working pressure of 5 psi
- Helps air circulate in drainage piping
- Solvent weld connections
- Apply a primer to the PVC before cementing
The PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability, and cost-effectiveness. PVC DWV is easy to install and is joined by solvent cementing or threading. PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode.
- Do not test or use with compressed air or other gases
- Maximum service temperature of 140 degree F
- NSF U.P. Certified
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0
The NIBCO PVC DWV double wye is used in residential and commercial drain, waste and vent systems. The PVC DWV 45 degree double wye features all hub connections and allows for a connection to be made in continuous pipeline and branch out to different directions. PVC DWV is easy to install and is joined by solvent cementing or threading.
- PVC fittings exhibit high corrosion and chemical resistance and will not rust, scale, pit or corrode
- Maximum service temperature of 140 degree F
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI standard 14
- UL Listed 94V-0