Dwv Fittings
The Water-Tite Techno Flange PVC Standard Pattern Closet Flange with Techno Knockout features a unique inset test cap that cannot be damaged by construction equipment, ensuring drain lines stay securely covered until installation and DWV (drain, waste, and vent) testing are complete. The Techno Knockout is specially designed to break out in one piece and will not fall down the drain line while it is being removed. Compatible with both 3- and 4 in. Schedule 40 DWV pipe, this toilet flange has a Flush-Tite design that allows for flush installation inside of 4 in. pipe. It also features a beveled hum, which makes it easier to insert into 4 in. foam-core pipe. The Techno Flange PVC Standard Pattern Closet Flange includes a durable stainless-steel ring that makes it easy to align bolts and screws, speeding up installation.
- PVC closet flange with inset test cap that cannot be damaged by construction equipment
- Techno flange knockout breaks out in one piece and will not fall down the drain
- Beveled hub design allows easier insertion into 4 in. foam-core pipe
- Stainless-steel ring for easy alignment of bolts and screws
- Fits 3 in. and 4 in. PVC schedule 40 DWV (drain, waste and vent) pipe
- PVC
DWV PVC Closet Flange 3 in. x 4 in. Solvent Welds Inside 4 in. Or Over 3 in. Schedule 40 DWV Pipe. Stainless steel adjustable ring allows for easy alignment of bolts and screws. Alignment of bolts and screws.
- PVC offset toilet flange; sits 1-1/2 inches off center of drain pipe
- Shifts toilet installation location without having to change existing plumbing piping
- Stainless-steel ring for easy alignment of bolts and screws
- Full 3-inch flow helps prevent clogs
- Durable
- Closet flange
Keep your drainage cleanout free from debris and vermin with the AB and A PVC Countersunk Cleanout Plug. Available in a variety of sizes, this threaded plastic cleanout plug creates a tight seal to prevent wastewater, noxious fumes and dangerous sewer gases from leaking out of the cleanout. It features a slotted-head design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench sold separately). And unlike metal models, this plug has a durable PVC construction that won't rust or corrode in outdoor environments.
- Threaded plastic plug for drain cleanout
- Durable PVC construction with a slotted countersunk head
- Tight seal prevents wastewater, fumes and sewer gases from leaking out of the cleanout
- Prevents debris and vermin from entering cleanout
- Made of plastic that won't rust or corrode in outdoor environments
- Designed for heavy duty use
PVC Flush Tite Closet Flange. Fits Inside 3 in. Sch. 40 DWV. Solvent weld installation only.
- Flush-Tite closet flange
- Fits inside 3 in. Sch. 40 DWV
- Solvent weld installation only
- Plastic
- Durable
- PVC
Keep your drainage cleanout free from debris and vermin with the AB and A PVC Countersunk Cleanout Plug. Available in a variety of sizes, this threaded plastic cleanout plug creates a tight seal to prevent wastewater, noxious fumes and dangerous sewer gases from leaking out of the cleanout. It features a slotted-head design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench sold separately). And unlike metal models, this plug has a durable PVC construction that won't rust or corrode in outdoor environments.
- Threaded plastic plug for drain cleanout
- Durable PVC construction with a slotted countersunk head
- Tight seal prevents wastewater, fumes and sewer gases from leaking out of the cleanout
- Prevents debris and vermin from entering cleanout
- Made of plastic that won't rust or corrode in outdoor environments
- Designed for heavy-duty use
Designed for streamlined installation, the Water-Tite Push 'N Repair Closet Flange makes replacing old and damaged flanges as simple as pressing a new unit into place. This bolt-free push-in PVC replacement flange features a one-piece construction with a pre-lubricated gasket that is permanently attached to the flange's hub. Compatible with 3- and 4-inch PVC, DWV (drain, waste, and vent), and cast-iron piping, the Push 'N Repair Closet Flange seals the entire length of the tailpiece extension. A full 3-inch flow (with no obstruction from bolts) helps prevent clogs, and the tailpiece can be cut to adjust its length.
- Push-in PVC replacement closet flange; durable one-piece construction
- Seals entire length of tailpiece extension; tailpiece can be cut to desired length
- Pre-lubricated gasket and no bolts to tighten
- Fits 3- and 4-inch PVC, DWV (drain, waste, and vent), and cast-iron piping
- Full 3-inch flow (with no obstruction from bolts) helps prevent clogs
- Water-Tite
Keep your drainage cleanout free from debris and vermin with the AB&A PVC Countersunk Cleanout Plug. Available in a variety of sizes, this threaded plastic cleanout plug creates a tight seal to prevent wastewater, noxious fumes, and dangerous sewer gases from leaking out of the cleanout. It features a slotted-head design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench sold separately). And unlike metal models, this plug has a durable PVC construction that won't rust or corrode in outdoor environments.
- DWV PVC recessed cleanout plug
- 3-1/2 in.
- Countersunk plug
- Durable plastic
- Made of plastic that won't rust or corrode in outdoor environments
- Corrosion resistant
Keep your drainage cleanout free from debris and vermin with the AB&A PVC Countersunk Cleanout Plug. Available in a variety of sizes, this threaded plastic cleanout plug creates a tight seal to prevent wastewater, noxious fumes and dangerous sewer gases from leaking out of the cleanout. It features a slotted-head design that requires a cleanout-plug wrench to open, helping to prevent tampering (wrench sold separately). And unlike metal models, this plug has a durable PVC construction that won't rust or corrode in outdoor environments.
- Threaded plastic plug for drain cleanout
- Durable PVC construction with a slotted countersunk head
- Tight seal prevents wastewater, fumes and sewer gases from leaking out of the cleanout
- Prevents debris and vermin from entering cleanout
- Made of plastic that won't rust or corrode in outdoor environments
- Designed for heavy duty use
PVC Schedule Poptop Toilet Flange 4 in. Solvent weld installation only. Fits Over 4 in. Sch. 40 DWV PVC Pipe, with Knockout.
- PVC toilet flange 4 in.
- Solvent weld installation only
- Fits over 4 in. Sch. 40 DWV PVC pipe with knockout
- Durable
- PVC
- Designed for heavy-duty use
Ideal for plumbing in tight areas, the Water-Tite 45-Degree Closet Flange comes with an adjustable ring (available in either plastic or stainless steel) that offers easy alignment of bolts and screws, speeding up installation. Choose from models that come with or without knockouts to fit either ABS or PVC systems to suit your specific installation needs. This closet flange fits securely over the top of 3-inch or inside of 4-inch Schedule 40 DWV (drain, waste, and vent) pipe.
- 45-degree angle allows closet flange to fit in tight spaces
- Available with either a plastic or a stainless-steel adjustable ring
- Designed for easy alignment of bolts and screws
- Choose from ABS or PVC models with or without knockouts
- Fits 3- and 4-inch Schedule 40 DWV (drain, waste, and vent) pipe
- PVC
DWV PVC Closet Flange 4 in. . Metal adjustable ring allows for easy alignment off bolts and screws. Fits Over 4 in. Sch. 40 DWV PVC Pipe, w/o Knockout.
- PVC closet flange
- Metal adjustable ring allows for easy alignment
- Fits over 4 in. Sch. 40 DWV PVC pipe, w/o knockout
- Adjustable
- 4 in.
- Durable